A great way to keep your battery ready to go for your next ride.
WHAT'S IN THE BOX,
- G750 Charger,
- Battery Clamp Connectors,
- Eyelet Terminal Connectors,
- Quick Start Guide
Step 1: Diagnostics
Checks the battery voltage to make sure battery connections are good and the battery is in a stable condition before beginning the charge process.
Step 2: Soft Start
Begins Bulk charging process with a gentle (soft) charge.
Step 3: Bulk
Continues Bulk charging process, returns 90% of battery capacity.
Step 4: Absorption
Step 5: Maintenance
Monitors the battery voltage continuously to determine if a maintenance charge should be initiated. If the terminal voltage falls below approximately 6.4V (6V) and 12.8V (12V), the charger will start the Maintenance cycle until voltage reaches approximately 7.2V (6V) and 14.4V (12V) and
then will discontinue the charge cycle.
Maintenance cycle is repeated indefinitely to keep the battery at full charge, without overcharging. The battery charger can be left connected indefinitely.
The time required for the G750 to charge a normally discharged battery is shown below. Deeply discharged batteries may take longer to charge depending on the depth of discharge (DOD). The charge time is based on an average depth of discharge to a fully charged battery.