GPS Drift Quad | Rolling Chassis Kit (No Engine)

GPS Drift Quad Rolling Chassis Kit

Free freight shipping to the contiguous lower 48 United States.

The "No-Weld" DIY Build.

The GPS Drift Quad Roller Kit is the perfect middle ground for the garage builder. We’ve done the heavy lifting—precision welding the American-made steel frame and pre-bleeding the hydraulic brake system—so you don't need a TIG welder or a mess of brake fluid to get started.

But make no mistake: this is a true builder's kit. You receive a box of premium parts: the frame, axle, steering components, brakes, and tires. It is up to you to bolt it together and set the alignment. It’s the satisfaction of building your own drift machine, without the fabrication headache.

Choose Your Tire Setup:

• Option 1: 15" Street Tires (Grip/All-Terrain)
• Best For: Rougher asphalt, neighborhood cruising, and higher ground clearance.
• Note: Tires come mounted on the wheels.
• Option 2: 11" Drift Slicks (Smooth Concrete)
• Best For: Technical sliding on smooth surfaces.
• Note: Tires come mounted on the wheels. Compatible with 10" PVC Sleeves (not included).

---

Key Selling Points:

• Fabrication Finished, Assembly Required: The heavy-duty steel frame arrives fully welded and raw, ready for parts. No cutting, grinding, or welding needed.
• No-Mess Braking: We know bleeding brakes is a pain, so we did it for you. The hydraulic brake system arrives pre-filled, pre-bled, and sealed. Just bolt the caliper and master cylinder to the frame.
• Complete Component List: We’ve sourced every bolt, bearing, and bracket you need to get rolling. No more hunting for mismatched hardware at the hardware store.
• Educational Build: A perfect weekend project to learn the mechanics of kart steering and drivetrain systems.

What’s Included in the Box (Unassembled):

• 1x Welded Frame: GPS Drift Quad Chassis (Made in USA).
• Steering Kit: Spindles, Tie Rods, Steering Shaft, Risers, and Handlebars.
• Braking Kit: Hydraulic Caliper, Master Cylinder, Hose, and 8" Disc (Pre-bled and ready to mount).
• Drivetrain: 1" Live Axle, Hangers, Bearings, Hubs, Sprocket, and Chain.
• Rolling Stock: Rims and Tires (mounted and ready to install).
• Fuel Tank: UniTank remote fuel tank (mounts in front of the seat).
• Controls: Billet Thumb Throttle and Kill Switch.
• Hardware: Full nut-and-bolt kit for assembly.

(Note: Engine, header pipe, clutch or torque converter, and chain guard are NOT included.)

Looking for a Complete Kit?

• GPS Drift Quad Complete Kit: Get the GPS Drift Quad with a Tillotson 212 Engine, Stage 1 Kit, Rascal GT Header Pipe and 30 Series Torque Converter with our Complete Kit

---

⚠ Important Build Notes:

1. Assembly Is Required: This is a kit, not a finished vehicle. You will need standard hand tools to assemble the chassis and install the engine components.  Step-by-Step directions available HERE or watch the Full Build Video HERE.

2. Engine Compatibility: Designed for 196cc / 212cc Small Block Engines (Honda GX200, Predator 212, Tillotson 212).

3. Fuel System Mod: Stock gas tanks WILL NOT FIT. You must remove the engine's top-mounted tank and use the included UniTank due to the frame's low-profile design.

Things To Know:

• The frame comes in bare steel, ready for your paint or powder coat.
• Mock up the entire build before painting so you can confirm fitment, drill your seat and tank holes and test your riding position.
• Adult Signature is required. 
• Free Freight Shipping: Ships free to the contiguous lower 48 United States. Not eligible for expedited 2-day shipping.
• Assembly Is Required: This is NOT a pre-assembled kart. You will need standard hand tools to assemble the chassis. (Note: Brakes arrive pre-bled for easier assembly).

Disclaimer: 

Use of our products (Mini-bikes, Go-karts and parts) may result in injuries and risks commonly associated with powersport-type activities. It is recommended that you wear proper safety equipment at all times, including but not limited to, Gloves, and a Helmet. By using this product, you voluntarily assume the risk of injuries, and further acknowledge that GoPowerSports, shall not be responsible for any injuries or damages resulting from use of this product. This product is not recommended for use on public roads or unsafe terrain. Be aware of all applicable laws which may govern the use of this product in public areas as this product is not to be used in such instances which may violate local laws and/or in public areas which may cause injuries or accidents to bystanders.