Bearings

Bearing 1621RS, 1-3/8"OD x 1/2"ID

Ball Bearing with an 1.375" Outside Diameter and a .5" Inside Diameter.  A 12mm axle from the Lil Rascal/Rascal/Mega Moto 80 Minibikes will slide through this bearing.

Bearing 6207-RS

6207RS Ball Bearing Used on TrailMaster 300XRX Rear Axle Inner Bearings Dimensions: 35mm ID 72mm OD 17mm Width

Bearing 6201

6201 Ball Bearing for go-kart and mini bike wheels.   Dimensions: Inner Diameter - 12mm Outer Diameter - 32mm Fits: Blazer200R outer front wheel bearing.  Rascal Mini Bike Bearing Lil Rascal Mini Bike Bearing Mega Moto...

Bearing 3/4", 1 3/8"OD

Bearing 3/4" ID 1 3/8 OD with machined lip

Sealed 1 3/8" OD

1 3/8" Outside Diameter,5/8" ID has machined lip instead of snap ring, very durable

Ball Bearing 6205 (TPI)

Radial Ball Bearing: 6205, Dbl Sealed, Contact Seal, 25 mm Bore, 52 mm OD, 15 mm Wd.  High-clearance radial ball bearings have more space within the bearing housing. They are useful when there is an increased press fit on the housing,...

3/4" ID Precision Ball Bearings- 1 5/8" OD

3/4" Inside Diameter, 1 5/8" OD. used on 3/4" Carter live axle karts and Yellow jacket karts.

Axle Bearing, 1" Round or 7/8" Hex

Each axle uses two bearings.  1" round bearing may come with set screws or a concentric lock ring.    3941 used on round 1" live axle,   3941H used on Manco 7/8" hex axle Outer diameter on both 2"

Bearing Radial Ball E6310

Radial Ball Bearing 6310, used in 150cc transmission.

Bearing Radial Ball E6203

bearing 6203, used in 150cc transmission   Inner Diameter - 17mm   Outer Diameter - 40mm

Bearing Radial Ball 6004-2RS

Bearing 6004 is used in 150cc transmission and on Mid-XRX, MB-200/Hurricane TAV and Jackshaft.    Inner Diameter - 20mm   Outer Diameter - 42mm

Bearing Radial Ball E6002

Radial Ball Bearings E6002 for many applications. Bearing Dimensions: OD: 32mm ID: 15mm Width: 9.9mm

Bearing 6202-2R

Outer front hub bearing on the 150/250/300 karts, used as inner bearing on the mini and mid karts.    TrailMaster MB200 Bearing Baja Warrior Bearing Coleman CT200 Bearing   Inner Diameter - 15mm Outer Diameter - 35mm

Bearing 6007

Radial sealed bearing for 250cc rear axle.   Inner Diameter - 35mm   Outer Diameter - 62mm

Bearing 6206

150cc Rear axle bearing  Inner Diameter  - 30mm  Outer Diameter - 62mm Also used on the Blazer 150  - 62062RS0000000

Bearing 6003

Bearing number 6003   Inner Diameter - 17mm   Outer Diameter - 35mm   Replacement Jackshaft bearings for 30 Series TAV Kit.

Inner Bearing 6204-Z

Inner front hub bearing on 150/250/300 models as well as rear axle bearing for mini karts by Hammerhead and TrailMaster.   Inner Diameter - 20mm   Outer Diameter - 47mm

Mid Rear Axle Bearing E6005-2RS

Rear Axle bearing 6005 for Mid size kartsEach axle requires 2 bearings.   Inner Diameter - 25mm   Outer Diameter - 47mm

5/8" ID Sealed Bearing, 1 3/8" OD, Common

Standard bearing used on most gokarts for wheels and jackshafts.   5090 Bearing Dimensions: 5/8" Inside Diameter 1-3/8" Outside Diameter Does have outer snap ring

3/4" ID Bearing, 1 3/4" OD, common

Sealed only on the outside of bearing   3/4" Inside Diameter 1-3/4" Outside Diameter Standard bearing used on Manco go-karts