Ebox V3 60R Electric Pit Bike

EBOX V3 60R Electric Pit Bike

The Next Generation of Electric Pit Bikes is Here.

You asked for more power, more punch, and a higher top speed—and EBOX delivered. The highly anticipated EBOX V3 60R has arrived, featuring the brand-new EBX Powertrain. Stepping up from the base model, the 60R delivers aggressive acceleration, longer range, and a heavy-duty steel-cased battery, making it the ultimate mid-tier electric pit bike.

The All-New EBX Powertrain

At the heart of the V3 60R is a high-power PMSM motor pushing out an incredible 5.2kW (6.7 HP) of peak power and topping out at a blistering 53 mph. EBOX eliminated traditional hall sensors, upgrading to a precise motor encoder with temperature feedback. Paired with a massive 80A Fardriver controller, this bike delivers laser-sharp coil firing for maximum efficiency, zero hesitation, and unmatched throttle response.

Upgraded Battery & Total Control

The 60R boasts an upgraded 60V 26Ah Battery potted in a rugged steel case, extending your ride time to 25-28 miles per charge. The cockpit has been completely modernized with a brand-new full-color TFT display. Easily toggle between 3 different speed modes to match your riding style, and use the built-in fault-code analysis software to keep your bike running perfectly.

Backed by an upgraded 1-Year (or 1,000-mile) Powertrain Warranty covering the battery, controller, and motor, the EBOX V3 60R is built to be ridden hard and put away wet.

---

Performance Specifications

• Top Speed: 53 mph (85 km/h)
• Range: 25-28 miles (40-45 km)
• Max Load: 85kg (Approx. 187 lbs)
• Bike Weight: 112 lbs (50.8 kg)

Powertrain & Tech

• Motor: 60V EBX PMSM motor with temp feedback and encoder
• Rated Power: 4.5KW
• Peak Power: 5.2KW (6.7hp)
• Max RPM: 8,500
• Battery: Upgraded 60V 26Ah battery (18,600 cells) potted in a steel case with QS8 connector and air breaker switch
• Controller: 80 Amp Fardriver controller
• Display: TFT odometer display with 3 speed modes and fault code analysis software
• Throttle: SURRON style full twist
• Connectors: Automotive connectors with sealed wiring harness
• Charger: AC 100-240V, Output: 67.2V, 5A
• Charge Time: 4-5 hours
• Chain: 219H 120L
• Gearing: Front 10T, Rear 70T

Chassis, Suspension & Brakes

• Frame Type: V3 Double Cradle (Wide frame 190mm, race-inspired geometry)
• Front Wheel Size: 14"
• Rear Wheel Size: 12"
• Front Tire: Upgraded 60/100-14 Dirt
• Rear Tire: Upgraded 80/100-12 Dirt
• Fork: 150mm travel USD (Inverted) with increased pre-load and heavier oil
• Rear Suspension: Progressive mono shock 150mm travel
• Front Brake: Hydraulic Disc (Right lever) e-moto brakes
• Front Disc: 180mm rotor, 4 bolt
• Rear Brake: Hydraulic Disc (Left lever) e-moto brakes
• Rear Disc: 180mm rotor, 4 bolt
• Handlebar: 6061 T6 EBOX High Rise 1pc
• Bar Risers: Alloy Cast 36mm rise Ø22.2
• Seat: EBOX fat seat

Things To Know:

• Shipping is only available to Contiguous Lower 48 States.   
• Average shipping lead times are a week to a week and a half. There is no expedited shipping available for this item.
• If you received damaged parts or parts missing, please email our sales department at Sales@gopwoersports.com with photos so we can asses the situation.
• Assembly is required.  Final assembly and maintenance does require some basic mechanical knowledge. Before purchasing, it is wise to consider your abilities to perform the needed maintenance and repairs that will be required.
• Unit will be drop shipped in 3-10 days from purchase

Warranty:

EBOX – Electric dirtbike Trade Warranty
Warranty Coverage:

• Stomp Distribution Ltd extends the following parts-only warranty for trade purposes, commencing from the original retail purchase date. Given that the bike is delivered in a crate, it is imperative for trade partners to engage a qualified motorcycle mechanic for proper assembly. Failure to adhere to this prerequisite will result in the nullification of the trade warranty associated with the bike. To initiate a trade warranty claim, a copy of the bike's Pre-Delivery Inspection (PDI) must be provided. For eligibility under the trade warranty, it is mandatory to register the PDI (Pre-Delivery Inspection) of the bikes with Stomp Distribution. Registration can be completed through the following link: https://form.123formbuilder.com/3063093/. Additionally, trade partners can access the Stomp EBOX user manual, inclusive of a PDI guide, at the following link: https://eboxelectric.com/media/Ebox%20manual%20V4.pdf.

Stomp Distribution extends the following trade warranty coverage for electric bike components:

• Battery: Coverage: 6 months from the date of purchase. Stomp Distribution guarantees the battery, encompassing any defects in materials and workmanship. In the event of battery failure within the stipulated warranty period, a replacement will be provided (All depleted batteries should be returned to Stomp Distribution for recycling). Diagnosis of a fault must be conducted by an authorized EBOX dealer. Batteries will not be eligible for coverage if brake kill switches are removed or if the instructions outlined in the EBOX user manual are not adhered to. Specifically, during periods of vehicle inactivity, it is essential to recharge the battery at least once a month until regular use is reinstated. Failure to turn off the power switch or neglecting to charge the product for an extended duration may result in the battery reaching a state where it is unable to retain a charge.
• Motor, Controller, and Other Components: Coverage: 6 months from the date of purchase. Stomp Distribution provides a trade warranty for the motor, controller, and all other electric bike components, excluding wear and tear parts. This warranty covers defects in materials and workmanship. In the event of a failure of any of these components within the specified trade warranty period, replacement parts will be sent to be fitted by a qualified mechanic. Warranty invalid if EBOX modified or upgraded in any way. This includes but not exclusive to:
• Disconnecting brake switches
• Bypassing BMS
• Battery voltage changes or battery changes
• Motor/controller changes
• Other electrical modifications
• Mechanical hardware changes suspension etc.

Exclusions: This trade warranty does not cover the following wear and tear parts unless there is a factory defect:

• Tyres
• Brake pads
• Brake discs
• Chain
• Sprocket
• Plastics
• Wheels
• Bearings
• Suspension
• Grips
• Seat

Damage caused by water exposure, including but not limited to submersion, immersion, or exposure to excessive moisture, is explicitly excluded from warranty coverage. This includes damage resulting from riding in heavy rain, submergence in bodies of water, or exposure to water during cleaning or maintenance.

Warranty Claims:
To initiate a trade warranty claim, the buyer should contact the authorized dealer from whom the product was originally purchased during the specified trade warranty period. The Trader is required to complete the warranty form available at https://stomp-group.com/. It is essential to ensure that all details are accurately completed; failure to fill out the form in its entirety may result in the denial of the trade warranty. Proof of purchase, including the purchase date, must be provided, along with a detailed description of the alleged defect. Upon verification of the trade warranty claim, the company will, at its discretion, proceed with either repairing or replacing the faulty parts. If you choose to sell a bike online in a box, Stomp Distribution LTD accepts no warranty, nor any other liability or account for recourse resulting from any claim or complaint whatsoever unless that customer provides us directly or indirectly with a completed PDI sheet filled out by a qualified mechanic.