Chromoly Push Rods: All 6.5HP Small Blocks, Cut To Length

High Strength Cut To Length Chromoly Push Rods

• When shortening the columns more that 3/8" it will be necessary to re-size the hole with a .125" reamer to a depth of .250"
• Once the length has been adjusted, clean and deburr the columns, apply Loctite and press the ends together
• To help eliminate any damage press your push rod ends together with the push rod side of a couple of lifters. .187" diameter with a max length of 6.25"

The following are recommendations only and may not work for all applications. See notes for regarding pushrod length.

GX200, BSP "Clones", 6.5 Chinese OHVs

• 5.260 Stock Length; Use with stamped Rocker Arms
• 5.160 (-.100); Use with Billet & Roller Tip Rocker Arms
• 5.110 (-.150); Use with Billet/Roller Tip Rockers along with extensive milling (>.065")
• 5.440 (+.180); Allows use of 160 Lifters in 200 blocks to reduce valve train weight. Reduces combined lifter/Pushrod weight by approx 7%. Use with stamped Rocker Arms
• 5.340 (+.080); Allows use of 160 Lifters in 200 blocks with Billet or Roller Rockers. Also use with some Aluminum Rockers

212 Predators (Old Style)

• 5.200; Stock length
• 5.110 Use with Billet & Roller Rockers
• 5.260 Use with Aluminum Rocker Arms

212 Predators (Hemi Head)

• 5.540 Stock Length, most applications
• 5.440 (-.100) use with extensive milling
• 5.260 use with NR Racing Hemi Rollers
• 5.160 use with NR Racing Hemi Rollers and heads milled .065 or more, also with large base circle cams.

Tillotson 212E and 212EE

• 5.823"

No returns on this product, if you have any questions, please call before ordering.