Valves & Components

Stainless Steel Valve, 32mm

Stainless Steel Valve for small block engines.  Can be used for either intake or exhaust side. This Valve has a 32mm Valve Diameter and 5.5mm Stem.  Choose your length.  Stock length is 2.65.

Stainless Steel Valve, 28mm

Stainless Steel Valves for small block engines, could come either black or silver. Can be used for either intake or exhaust side. This valve has a 28mm Valve Diameter and 5.5mm Stem.  Choose your length.  Stock length is 2.65.

Chromoly Push Rods: 5.44"

No Returns on this product. If you have questions about it, please call before ordering. Heavy Duty Chromoly Push rods. Considerably stiffer than stock. Use with all HD springs. Capable of 10,000 RPM +These pushrods are sold as a pair.The following are...

Chromoly Push Rods: 5.34"

No Returns on this product. If you have questions about it, please call before ordering. Heavy Duty Chromoly Push rods. Considerably stiffer than stock. Use with all HD springs. Capable of 10,000 RPM +These pushrods are sold as a pair.The following are...

Chromoly Push Rods: 5.16"

No Returns on this product. If you have questions about it, please call before ordering. Heavy Duty Chromoly Push rods. Considerably stiffer than stock. Use with all HD springs. Capable of 10,000 RPM +These pushrods are sold as a pair.The following are...

Chromoly Push Rods: 5.11"

No Returns on this product. If you have questions about it, please call before ordering. Heavy Duty Chromoly Push rods. Considerably stiffer than stock. Use with all HD springs. Capable of 10,000 RPM +These pushrods are sold as a pair.The following are...

Adjustable Pushrod Tool, 6.5hp Engines

DO NOT RUN IN MOTOR! USE WITH STOCK VALVE SPRINGS ONLY! Adjustable Push Rod tool for checking proper Pushrod length in modified engines.  Adjust from 5.05" to 5.60" so this can be used in 212cc Tillotsons, 212cc Predators, 196cc Clones, Honda...

Retainer Kit (Dual Valve Springs)

 No Returns on this product, if you have questions about it, Please call before ordering. This pair of billet aluminum spring retainers are a great upgrade to your valve train when using high lift camshafts such as the 275 or 308 cams. These will...

Dual Valve Spring Kit, Titanium Retainers

This kit is intended for modified engines wanting to achieve high rpm's and maintain reliability of the top end. These are heavy duty springs and super light/strong titanium retainers for highly modified 196cc-225cc honda clone engines such as the...

Stainless Steel Valve, 28.5mm

 No Returns on this product, if you have questions about it, Please call before ordering.

Stainless Steel Valve, 24mm

 No Returns on this product, if you have questions about it, Please call before ordering.

Stainless Steel Valve, 25mm

Stainless Steel Valve for Small Block Engines. These valves can be used for either valve or intake side.  25mm Valve Diameter and a 5.5mm Stem, you choose your overall length.  Stock would be 2.58 Length.

Stainless Steel Valve, 27mm

Stainless Steel Valve for small block engines.  Can be used for either intake or exhaust side. This valve has a 27mm Valve Diameter and a 5.5mm Stem size.  You choose your length.  Stock length is 2.58.

Chromoly Push Rods: 5.200"

No Returns on this product. If you have questions about it, please call before ordering. Heavy Duty Chromoly Push rods. Considerably stiffer than stock. Use with all HD springs. Capable of 10,000 RPM +These pushrods are sold as a pair.The following are...

Chromoly Push Rods: Big Block (7")

 No Returns on this product, if you have questions about it, Please call before ordering.

Chromoly Push Rods: Big Block, Cut to Length

 No Returns on this product, if you have questions about it, Please call before ordering.

Retainer Kit (36 lb)

 No Returns on this product, if you have questions about it, Please call before ordering. This pair of billet aluminum spring retainers are a great upgrade to your valve train when using high lift camshafts such as the 275 or 308 cams. These will...

Billet Lifter Set

 No Returns on this product, if you have questions about it, Please call before ordering. These bill lifters are intended to be use in modified engines with aggressive camshafts. Precision CNC machined from superior grade alloy steel and heat...

Guide Plate with Free Floating Bronze Bushings

 No Returns on this product, if you have questions about it, Please call before ordering. Designed and manufactured for precise push rod fitment. Oil impregnated bronze bushings fills the need for absolute control of side to side push rod movement...

Guide Plate, Billet

 No Returns on this product, if you have questions about it, Please call before ordering. Billet guide plate for use with chrome moly push rods. GX200 GX160 6.5 Non-Hemi Chinese OHV's