Note: Most Coleman Bikes engines come with jets that are not removable. Suggest order stage 1 carburetor that comes with performance jet ( .038) already installed. SKU PSC.S2
- Coleman CT200U
- Coleman BT200
- Trailmaster MB200
- Baja Warrior
- Monster Moto 212
Performance kit features 4 easily interchanged parts that will turn your factory stock 6.5 hp engine into a beast.
You will use your original emulsion tube.
Header pipe may have small areas of surface rust.
With the newer Coleman units, they will come stock with an EPA Carburetor with a jet that can not be backed out. It is recommended that you use our stock carburetor and swap the stock jet with the performance .038 jet.
This kit features:
- 1 air filter adapter, choice of RED or Blue
- 1 K&N style high flow air filter, choice of RED or Blue
- 1 upgraded main jet - .038
- carb. gaskets
- 1 performance header pipe
- 20" Safety header sleeve
These products help the engine to breathe better and ultimately move more air in and out of the engine more efficiently which gives you more power!
Optional Upgrade Features:
- Performance muffler for a quieter sound and added low and mid-range power.
- Heavy duty valve springs meant to add performance and durability.
- Header gasket
Takes about 20 - 30 minutes to install.
Videos Hide Videos Show Videos
95 Reviews Hide Reviews Show Reviews
The bolts will not remain tight on my exhaust but it looks real sharp on my bike. Not sure I would buy it again.
The solder was messy and all over but I modified and sanded it
I love the fact that the header gives a much better sound than the stock muffler. Wish there was some instructions on how to remove install the valve springs and the throttle Choke hold piece was a little confusing to figure out
Stage 1: Coleman CT200U-EX/MB200/Baja Warrior Performance Kit
Great kit. Easy to install can definitely feel improvements. I do suggest getting a muffler though. I wish a less $ option was available through here.
This is an awesome kit with everything you need to really improve your bike's performance. I have a BT200x and everything fit perfectly. The jet on the BT200 is tamper proof, so I tapped a torx bit down into it with the back of a wrench. The jet is soft brass so the bit dug in and it came right out. Other than that I just watched a couple of videos to complete the install, and I'm a novice to engine work. Thanks GPS for making this 46 year old feel 14 again! What a huge improvement.
Will continue to buy stuff from you guys. Found out about this website through red beards garage on YouTube. Awesome channel. A+
Easy to install power, although mine did not come with a gasket for the exhaust header.
I purchase this performance kit along with the muffler and clamp. When receiving the order, the muffler and clamp were missing. I called customer service and they promptly mailed the muffler and clamp out that same day.
When installing the exhaust pipe, I had to grind down some of the weld at the seam where the pipe is welded to the exhaust bracket. I could not get the lock washers to lay flat and also could not tightened the nuts because they jammed against the weld. The issue was resolved after a little grinding.
I realize that thousands of these are manufactured and occasionally there is apt to be one slightly off and I just happened to get one of those. No problem because Go Power Sports customer service and tech support is outstanding.