Introducing, the Rascal Minibike Kit by GoPowerSports. The Rascal is the big brother to our Lil Rascal Minibike Kit and is more comparable in size to the Doodlebug Minibikes. This bigger frame size will be comfortable for adults and teenagers, and also allows you to fit a stock 212 Engine without any modifications. (Engine is not included.) The Rascal Minibike Kit comes with everything you need to make a "Roller". Frame made in the USA.
Frame and Forks do not come painted, these are bare mild steel ready for your paint job or powder coat.
Note: It is recommended to mock up all parts on frame before painting to ensure everything lines up, sometimes you may need to make some minor adjustments or re-drill some holes. Best to make modifications before painting.
Tools and assembly are required. Check out our Rascal Minibike Kit Assembly Video.
(Adult Signature required)
Dimensions and Specs:
- Seat Height - 22.5" (to bottom of seat)
- Handlebar Height - 37"
- Wheelbase - 41.5"
- Engine Mount Pattern - 6.375" x 3.125"
- 79cc Predator (Must use adapter plate that comes with the 79cc Predator)
- 196cc clones
- 212cc Tillotson / Predator
- 225cc Tillotson
- Rascal Frame
- Rascal Forks
- Rascal Handle Bars
- Riser Clamps
- Rear Axle/Bushings/Nut
- Front Axle/Bushings/Nut
- Neck Bolt/Bushings/Nut/Washers
- Front Tire/Wheel Combo - Mega Moto Mag Wheels
- Rear Tire/Wheel Combo - Mega Moto Mag Wheels (Takes M6x16 Bolts)
- Hydraulic Brake Kit
- Brake Disc
- 60T #420 Sprocket
- #420-5' Chain
- 1041 Centrifugal Clutch (3/4" bore)
- GPS Chain Guard
- Rascal Top Plate
- Rascal Gas Tank Brackets
- 10" Gas Tank/Bands/Valve
- Throttle and Handlebar Grip Assembly
- 52" Throttle Cable
- Engine Stop Switch
- Foot Grips
- Rascal Kick Stand w/ Spring
- Chain Roller
- Rascal Sticker Pack
**Currently, fenders and fender brackets are not available**
Suggested Parts to complete the Rascal Minibike:
- Tillotson 212E Engine
- 4T Oil
- 3/16" Fuel Line
Use of our products (Mini-bikes, Go-karts and parts) may result in injuries and risks commonly associated with powersport-type activities. It is recommended that you wear proper safety equipment at all times, including but not limited to, Gloves, and a Helmet. By using this product, you voluntarily assume the risk of injuries, and further acknowledge that GoPowerSports, shall not be responsible for any injuries or damages resulting from use of this product. This product is not recommended for use on public roads or unsafe terrain. Be aware of all applicable laws which may govern the use of this product in public areas as this product is not to be used in such instances which may violate local laws and/or in public areas which may cause injuries or accidents to bystanders.
13 Reviews Hide Reviews Show Reviews
my first build! The frame welding and structure is fantastic! I had a problem with the allen head bolts stripping for the rear sprocket install due to burs on the sprocket bolt holes as well as needed to file the rear hub and sprocket center hole a lot to have the sprocket sit flush on the hub. The only other thing i didnt like is I was provided multiple lock washers for spacing of the rear caliper and two half inch steel spacers would have been much better. Overall great but for the price i was hoping for near perfection and it was close to that. Side note. How do i remedy the massive virbration from the engine? (predator 212)
Quality parts. Super easy and fun build.
Parabéns a Go Power sports vocês são o orgulho de todos no mundo inteiro Very ...very...Very Nice
I am 23 years old, and I ride street bikes and dirt bikes daily. This little joker has some get up and go for it’s size. I think I have more fun on this than I do on my larger bikes. I was skeptical about buying this kit because in all it was about $1600 for my full build, but when I got it in, I painted it then assembled ASAP. With the juggernaut torque converter, this is a wheelie machine and will go well over 40+ mph. Shipping was fast and easy. Only problem I had was a few missing parts in my kit. I reached out to them, and they instantly shipped me the missing parts. I never did request the last missing part which was my brake caliper spacers, but I will try to improvise until I can find some to replace the stacked washers.
Totally awesome the kit most of all the customer service is fantastic and I live in Pennsylvania
The bike is amazing once built!!.... AMAZING but it did have it's flaws. This is my OWN personal opinion
1. They sent the wrong seat
2. They forget the brakes (sending brakes)
3.i had to modify the forks to actually fit
4. One tire is out of balance (flat spot)
5. Fuel shut off is plastic
6.seat is hard
I do like the bike alot but I think it should be about 150-200 cheaper
My first build and 98% complete. Hope it Rides as good as it looks. Go powersports have been Johnny on the spot on getting my orders to me in a timely fashion! Thank you guys!
my order was delivered quickly and was well packaged very happy and looking forward to my next order
I bought a new Coleman ct100 mini bike at Walmart for $379. I took out the engine and added a $139 hemi predator 212 engine and only got a little over $500 in it. By the time you buy the rascal kit and extra parts you need, you got $1,000. Might as well buy the MB200-2 for $1000