There is currently a 3 to 4 week delay on shipping this product.
The Rascal Max 212 Off-Road Minibike Kit is for those looking to build their next Terrain Conqueror! This adult sized frame is easy to assemble and easy to customize. The power unit on Kit is one of the best in the business with a Tillotson 212E Engine (over 9+HP), Stage 1 Performance Kit (extra 2-3 HP), and a 30 Series Torque Converter from GoPowerSports. Turn this minibike into your next Racer or build a fleet of these bikes for your next outdoor adventure.
Rascal Max 212 OffRoad Minibike Kit Features:
- Vintage Style Steel Bare Frame
- Powerful 9+HP Tillotson 212E Engine
- 30 Series Torque Converter for more pulling power
- Stage 1 Performance Kit for added engine strength
- Hydraulic Brakes
- Front Suspension
- Comfortable, Adult Minibike
- Easy to Assemble
- Ready For Paint
- Comes with everything you need to ride, just add gas
- Frame Made in the USA
Dimensions and Specs:
- Seat Height - 22.5" (to bottom of seat)
- Handlebar Height - 37"
- Wheelbase - 41.5"
- Engine Mount Pattern - 6.375" x 3.125"
- 79cc Predator (Must use adapter plate that comes with the 79cc Predator)
- 196cc clones
- 212cc Tillotson / Predator
- 225cc Tillotson
- Rascal Frame
- Rascal Forks
- Rascal Handle Bars
- Riser Clamps
- Rear Axle/Bushings/Nut
- Front Axle/Bushings/Nut
- Neck Bolt/Bushings/Nut/Washers
- Front Tire/Wheel Combo - Mega Moto Solid 6" Wheel
- Rear Tire/Wheel Combo - Mega Moto Solid 6" Wheel (Takes M6x16 Bolts)
- Hydraulic Brake Kit
- Brake Disc
- 60T #420 Sprocket
- #420-5' Chain
- 1041 Centrifugal Clutch (3/4" bore)
- GPS Chain Guard
- Rascal Top Plate
- Rascal Gas Tank Brackets
- 10" Gas Tank/Bands/Valve
- Throttle and Handlebar Grip Assembly
- 52" Throttle Cable
- Engine Stop Switch
- Foot Grips
- Rascal Kick Stand w/ Spring
- Chain Roller
- Rascal Sticker Pack
- Tillotson 212E Pull Start Engine
- 1/4" Fuel Line
- Tillotson Break In Oil
- Stage 1 Performance Kit
- 3 Stage High Center Exit Header Pipe
- 30 Series Torque Converter
- Engine Risers
- Hydraulic Front Suspension Kit or Leading Link Front Suspension
Frame and Forks do not come painted, these are bare mild steel ready for your paint job or powder coat.
Note: It is recommended to mock up all parts on frame before painting to ensure everything lines up. Sometimes you may need to make some minor adjustments or re-drill some holes, so it is best to make modifications before painting.
Tools and assembly are required. Check out our Rascal Minibike Kit Assembly Video.
(Adult Signature required)
Shipping only to Contiguous 48 States. If outside this area, please contact us for shipping quote.
Use of our products (Mini-bikes, Go-karts and parts) may result in injuries and risks commonly associated with powersport-type activities. It is recommended that you wear proper safety equipment at all times, including but not limited to, Gloves, and a Helmet. By using this product, you voluntarily assume the risk of injuries, and further acknowledge that GoPowerSports, shall not be responsible for any injuries or damages resulting from use of this product. This product is not recommended for use on public roads or unsafe terrain. Be aware of all applicable laws which may govern the use of this product in public areas as this product is not to be used in such instances which may violate local laws and/or in public areas which may cause injuries or accidents to bystanders.
Videos Hide Videos Show Videos
1 Review Hide Reviews Show Reviews
i ordered two of the lil’ rascal 212 mini bikes. their is no directions that come in the box for one of the bikes. but for the other one, the directions arent convenient, and are hard to access. some of the bolts that came in the packages werent labeled so it made it hard to figure out what bolts were for the chain guard because the fitting was a struggle for both the mini bikes even if we used other bolts that were provided. the back wheel on one of the bikes had bolt holes that were tapped and then painted over so none of the bolts would thread in correctly so we had to re-tap the holes in order for them to somewhat fit. the steering on the same bike which has suspension, the steering was extremely limited. the bolts on the bottom of the handle bars kept hitting up against the frame and it made it so you couldnt even ride in a circle. on both of the bikes that we ordered, the bolts dont fit in the holes selected for the chain guard. the chain on the other mini bike that doesnt have suspension was way oversized. the manufacturing in both bikes was poor. welding and grinding was very poor quality. definitely wouldnt recommend buying them. they are a waste of money and time. its a good headache saver.