GoPowerSports

Fitting, Pulse/Vent, 1/4" Hose

Fitting, Pulse/Vent, 1/4" Hose Installed on the Valve Cover / Engine Block / Side Cover to pulse the Fuel Pump DIY Instructions: Drill Hole with a 11/32" Drill Bit Use NPT 1/8" -27 NPT...

Stainless Steel Valve Kit: 212cc Predator

Fits: 212cc Hemi Predator Newer 212cc Non Hemi Predators (Will need to either replace guides to 5.5mm, or ream) Other Details: A must have for applications above 8,000 RPMs Valves will...

Stainless Steel Valve Kit: 196cc Clones / GX200

Fits: Honda GX200 Engines Honda Clone Engines 1st Generation Predator 212cc Engines Other Details: A must have for applications above 8,000 RPMs Valves will need to be lapped in to...

Exhaust Gasket 196cc / 212cc

Exhaust Gasket 196cc / 212cc Fiber Exhaust Gasket for 212cc Predators Engines Stud Hole Pattern: 1-13/16" Fits: Predator 212 Hemi and Non-Hemi Engines Tillotson 196 / 212 /225...

.010" Head Gasket: 196cc Clones, GX200

.010" Head Gasket: 196cc Clones, GX200 Viton Coated Head Gasket used to raise Compression  Bore Size: 68mm / 2.68"

.010" Head Gasket: 212cc Non-Hemi Predator

.010" Head Gasket: 212cc Non-Hemi Predator Viton Coated Head Gasket used to raise Compression Bore Size: 70mm / 2.756" Due to differences in Chinese blocks and dowel pin placement/size,...

Rubber Valve Cover Gasket

Rubber Valve Cover Gasket Tillotson# 138190038 Does NOT fit Tillotson 212cc Engines Used on: Used on 196cc and 225cc Tillotson Engines Honda GX200 Engines Non-Hemi Predator 212cc...

K&N Recharger Pack

The K&N Recharger Pack is an essential kit for maintaining the performance of your K&N air filter. It contains a 12oz bottle of specially formulated cleaner and an 6.5oz bottle of oil, both...

Header Pipe, Stock Clone Open

Header Pipe, Stock Clone Open Wide Power Range .930 x 1.060 x 1.220 x 20.5 Fits: Hemi & Non Hemi 196cc / 212cc Engines Honda GX160 & GX200 and Honda Clone Engines We strongly...

Honda CT-70 Carburetor

Honda CT-70 Replacement Carburetor Complete Fits Engines 1969 - 1977 If you have a newer model, a Pre-1977 Manifold is needed Product Details: Mounting Holes Distance: 48mm Intake: 16mm...

300cc Drive Belt 856-23

TrailMaster 300cc Go Kart Drive Belt   Marked Number on the Belt: 856-23

Header Pipe Allen Bolts With Safety Wire

Header Pipe Allen Bolts With Safety Wire Drilled for Safety Wire Sold in a Set Fits: 212cc Tillotson Engines GX200 Engines 212cc Predator Engines Honda Clone Engines   No...