Mikuni

Gasket, Mikuni Float Bowl TM24

Genuine Mikuni Float Bowl Gasket for TM24 flat slide carburetor.

Gasket, Mikuni Float Bowl TM28

Genuine Mikuni Float Bowl Gasket for TM28 flat slide carburetor.

Gasket, Mikuni Float Bowl VM30-VM34 Utilizing Baffle Plate

Genuine Mikuni Float Bowl Gasket for VM30-VM34 spigot-mounted carbs that utilize a baffle plate.

Gasket, Mikuni Float Bowl VM22

Gasket for Mikuni Float Bowl VM22-133.

Main Jet, Aftermarket 22/26mm Mikuni Carburetor

Mikuni Brand Main Jet for after market carburetors: 22mm Chinese Mikuni Carburetor [FDJ-PZ009] 26mm Chinese Mikuni Carburetor [MK26]

Pilot Jet, Aftermarket 22mm Mikuni Carburetor

Mikuni Brand Pilot Jet for Aftermarket Carburetors: 22mm Chinese Mikuni Carburetor [FDJ-PZ009] Stock Jetting in the Aftermarket 22mm is typically around .0150". Note:  Not all Aftermarket 22mm Mikuni have the same pilot jet.  Make sure...

Pilot Jet, Aftermarket 26mm Mikuni Carburetor

Pilot Jet for Aftermarket Carburetors: 26mm Chinese Mikuni Carburetor [MK-26] Note:  Not all Aftermarket 26mm Mikuni have the same pilot jet.  Make sure your pilot jet looks like the one depicted.

Mikuni Main Jet, OEM

Genuine Mikuni main jet for: VM22 24mm Flatside 28mm Flatside MIKUNIMAIN

Mikuni Pilot Jet, OEM

Genuine Mikuni pilot jet for : VM22 24mm Flatside 28 mm Flatsides MIKUNIPILOT

Velocity Stack, 40mm ID

Velocity Stack mounts to the outside of a Mikuni style carburetor, taking place of the air filter.   Comes with: (1) GPS Velocity Stack (3) Set Screws (1) Gold Filter net Fitment: Aftermarket 22mm Mikuni Dimensions: 2.5"...

Velocity Stack, 44mm ID

Velocity Stack mounts to the outside of a Mikuni style carburetor, taking place of the air filter.   Comes with: (1) GPS Velocity Stack (3) Set Screws (1) Gold Filter net Fitment: VM22 Mikuni OEM TM24 Mikuni Flatslide TM28 Mikuni...

22MM Mikuni Carburetor Performance Kit - Genuine

The best carburetor kit you can put on your small block engine to give you the best performance.  Easy to install and tune.  Amazing throttle response! Your governor must be removed to use a Mikuni Carburetor. Note: The OEM Mikuni...

Manifold Hardware, Mikuni VM 22

Hardware for our Mikuni VM22 Manifold connecting to a 196/212/225 Clone engine. 4-Bolts 2-Nuts

Manifold Hose 32/38mm

Carb to Manifold Adapter Hose. Dimensions: 32mm to 38mm 3" Long Commonly used on our 28mm Flatslide Mikuni Kit for Big Blocks

Manifold Hose 32mm

Carb to Manifold Adapter Hose. Dimensions: 32mm all the way through 3" Long Commonly used on our 24mm/28mm Flatslide Mikuni Kits for small blocks.

Manifold Hose 38mm

Carb to Manifold Adapter Hose.  Dimensions: 38mm all the way through 3" Long Commonly used on our 34mm Mikuni Kit for 270/390.

UNI Dual Layer Pod Filter - OEM 22/24/28

Uni Filter’s Angled Dual Layer “POD” Filters are the same as Dual Layer “POD” but are “angled” 15º to accommodate tight or unusual installations. Fit:   OEM 22mm/24mm/28mm Mikuni as well as the...

UNI Dual Layer Pod Filter - Aftermarket 22mm

Uni Filter’s Angled Dual Layer “POD” Filters are the same as Dual Layer “POD” but are “angled” 15º to accommodate tight or unusual installations. Fit: Aftermarket 22mm Mikuni Dimensions: 1.5" ID 3...

Needle and Seat for Mikuni TM24/VM28 Flatslides (for use with fuel pump)

Smaller sized needle and seat for both the Mikuni TM24 and the VM28 Flatslide Carburetors. This is a necessary modification if you are running a fuel pump to keep the bowl and carburetor from flooding.  Needle and Seat size: 2.0, stock is 2.5

Needle and Seat for Mikuni VM22-133

Smaller sized needle and seat for the Genuine Mikuni VM22-133. This is a necessary modification if you are running a fuel pump to keep the bowl and carburetor from flooding.  Needle and Seat size: 1.5 or 2.0 Use the smaller 1.5 size may be...