GoPowerSports

Retainer Kit (18lb, 22lb, 26lb)

Retainer Kit Great upgrade for Valve Train using High Lift Camshafts such as the .275 or .308 Cams Adds more control of the Valve at higher RPMs Includes 2 Retainers and 4 Keepers Pair with 1051...

Silicone Header Sleeve 20"

Silicone Header Sleeve Silicone Outer Construction Fiberglass Inner Construction Does not require Wire Ties or Clamps Sleeve will smoke the first few times after it's newly installed 20" Length The...

Max-Torque Centrifugal Clutch for Bicycle Chain 410, 415

Max-Torque Centrifugal Clutch For Bicycle Chain 410, 415 5/8" or 3/4" Center Bore with 3/16" Key Way 10 Tooth Sprocket Works with 410 and 415 Chain - 1/2" pitch Comes with Key, 2 Set Screws,...

Front Fender Bracket, 2 Bolt Style Passenger - 150cc / 200cc XRS/X

TrailMaster 2 Bolt Front Fender Bracket   Fits: TrailMaster 150-XRS Go Kart TrailMaster 150-XRX Go Kart TrailMaster 200E-XRS Go Kart TrailMaster 200E-XRX Go-Kart 

90 Degree Fuel Filter

90 Degree Fuel Filter Fits: 196cc Clone Engines Predator 212cc Engines GX200 Engines Typically used on engines utilizing the upgraded Top Plate and Fuel Pump design. When filter is connected...

410 x 3.50-5" Stud Tire, Original

Studded 2 Ply Tire Fits on 5" Diameter Wheel 12" Tall 3.5" Wide 

18lb Valve Springs

18lb Valve Springs Not recommended for any Cam with a .274 lift or higher Billet Connecting Rod and Billet Flywheel are recommended but not required Works with both Hemi and Non-Hemi...

Air Filter Adapter, 196cc / 212cc / 225cc Engines

Air Filter Adapter, 196cc / 212cc / 225cc Engines 2-7/16" OD Air Filter Adapter for K&N Style Air Filter Fits both Hemi and Non-Hemi Engines  

1" Hub Dual Mount Silver - Live Axle Type

1" Hub Dual Mount - Live Axle Type Silver 1" ID Rear Wheel Hub Dual Mount Bolt Pattern Accepts 1/4" and 5/16" Studs Pinch Bolt Included No returns on this product. If you have any questions, please...

Max-Torque Drive Sprocket for #35 Chain

Max-Torque Drive Sprocket for #35 Chain Range from 12 to 19 Teeth Features an Oil Impregnated 7/8" ID Bore Bushing Drive Sprocket changes can be made easily by removing the outer 3/4" Snap Ring...

Autolite 3910X Spark Plug

The Autolite 3910X Spark Plug Does not require a Gap Setting Fits: Predator 212cc Tillotson 212cc Tillotson 225cc Honda GX190 Most 196cc Clone Engines

Carburetor Choke Butterfly

Genuine BSP Carburetor Choke Butterfly Fits: BSP RuiXing Carburetors Huayi Carburetors Most other clone style carburetors. No returns on this product. If you have any questions, please call before...