Driven

780 Driven Pulley 3/4" Bore, Comet

Comet 780 Driven 301789A 3/4" center bore ideal for 18-30hp engines Comes with outboard spring 8-1/2" Diameter

40 Series Driven 5/8" Bore, Comet

40 Series Driven Pulley with a 5/8" Bore from Comet. 40 Series Driven, Made in the USA by Comet 5/8" center bore 7 5/8" OD driven pulley 3/16" Key Way

40 Series Driven 3/4" Bore, Comet

40 Series Driven Pulley, made in the USA by Comet. 7 5/8" diameter with a 3/4" center bore. Used with 40 series 7/8" wide belt.   Mounts inboard.  3/16" Keyway

780 Driven Pulley 3/4" bore Aftermarket

Quality Aftermarket 780 Driven  3/4" center bore ideal for 18-30hp engines Comes with outboard spring 8-1/2" Diameter

30 Series Torque converter Driven Rebuild Kit

Rebuild kit for 30 series driven pulley (green spring). Most common Torque converter type, note this will not work with a 20 series setup. 20 series uses a different spring.   Green 30 series spring Comes with 6 wear...

300cc Clutch Assembly, Driven

Rear driven clutch assembly for Trailmaster 300cc

150cc Driven Pulley With Drum

150cc Driven pulley with drum included.   TrailMaster part #152.10.200 HammerHead part # M150-1031000 Carter Talon Go Kart # 513-1047

Insert Wear Button for 20, 30 & Torq-A-Verter

Replacement push in retaining buttons used in 20 and 30 series torque converters on the driven pulley. Manco #6804 22575 Comet #204332A Sold 3 to a pack. If you are replacing all six buttons order two packs.

30 Series 7" Driven 3/4" Bore, Aftermarket

Common Murray kart driven unit 30 series 7" diameter 3/4" bore asymmetrical design   7" dia. 3/4" bore, Murray style

30 Series 7" Driven 3/4" Bore, Comet

Made in USA by Comet.  Common Murray kart driven unit 30 series 7" dia. 3/4" bore.   7" dia. 3/4" bore, Murray  

20 Series 6" Driven 3/4" Bore - Comet

Made in USA by Comet. This is a 20 series driven pulley symmetrical design.  6" diameter ,  3/4" bore and 3/16" keyway.  

20 Series 7" Driven 3/4" Bore, Comet

Made in USA by Comet. This is a 20 series driven pulley symmetrical design.  7" diameter,  3/4" bore 3/16" keyway

20 Series 7" Driven 5/8" Bore, Comet

Made in USA by Comet. This is a 20 series driven pulley symmetrical design.  7" diameter ,  5/8" bore and 3/16" keyway. 

20 Series 6" Driven 5/8" Bore, Comet

Made in USA by Comet. This is a 20 series driven pulley symmetrical design.  6" diameter ,  5/8" bore and 3/16" keyway. 

30 Series 7" Driven 5/8" Bore, Aftermarket

After markert 30 series driven pulley, 7" diameter with 5/8" bore. Used on all Yerf-dog go-karts with toque-converter models. Also used on some Manco models. For Yerf-dog go-karts this setup uses a part# 203591 drive belt. This is not made by Comet...

30 Series 7" Driven 5/8" Bore, Comet

Made in USA by Comet.  30 series 7" diameter driven with 5/8" bore, commonly used on all Yerf-dog karts with Tecumseh engines.

30 Series 6" Driven 5/8" Bore, Aftermarket

30 series driven pulley, 6" diameter with 5/8" / 16mm bore. Used on Manco karts with 5hp-7hp engines. Most common belt used with this is Manco belt 5959. This driven pulley is also used with comet Torq-a-verter kit with same belt. Not made by Comet...

30 Series 6" Driven 5/8" Bore, Comet

Made in USA by Comet.  30 series driven pulley, 6" diameter with 5/8" bore. Used on Manco karts with 5hp-7hp engines. Most common belt used with this is Manco belt 5959. This driven pulley is also used with comet Torq-a-verter kit with...

30 Series Driven Spring, Green

Green spring used on 30 series torque converter driven pulleys. Plastic stops are part number 204332 ( requires 6)

20 Series Driven Spring, Blue, 215698

Blue spring, used on comet 20 series driven pulleys. Popular on Carter Brother's go karts