TrailMaster

20x7-8 Front Wheel Assembly, 150cc / 200cc / 300cc Driver Side

 Driver Side Aluminum Mag Wheel Assembly with 20x7-8 Tires 7" Wide Wheel Center Hole: 4 1/2" Diameter, Bolt Hole Pattern: 4 5/16" (110mm) Measuring Across Center Hole

Front Right Brake Caliper

Passenger Side (Right) Front Caliper Works on all 150cc / 250cc / 300cc Go Karts   Brake Pads Included Mounting Bolts are 2 1/2" Center to Center Does NOT come with Banjo Bolts or Washers...

Rear Mirror Assembly

Replacement Rear Mirror Assembly   Works With 150cc / 250cc Hammerhead Go Karts TrailMaster 150 XRX TrailMaster 300 XRX Some Carter Talon Go Karts

Horn Switch - 150cc / 250cc / 300cc

Works on 150cc / 250cc / 300cc Hammerhead and TrailMaster Go Karts.   No returns on this product. If you have questions, please call before ordering. 

Brake Lamp Switch

Threads into the 150/300 Go Kart Master Cylinder and activates brake lights. On newer models Go Karts, the brake must be depressed to crank the engine.    No returns on this product,...

3/16" Inline Fuel Filter

Inline Fuel Filter 3/16" Nipples on Both Sides

Fuel Cap

This Fuel Cap can be used on many different models of HammerHead, TrailMaster, American Sportworks, Carter and other Chinese Go Karts.  

Transmission Shift Lever Assembly

This Transmission Shift Lever is commonly used on TrailMaster, Hammerhead, and American SportWorks 150 and 300 Go Karts with internal reverse. The lever comes equipped with a forward, neutral, and...

Trailmaster 300XRX Speedometer

The Trailmaster 300XRX Speedometer features a clear and easy-to-read display that shows your current speed, as well as other useful information such as trip distance, total distance, and time.  ...

Lower Suspension Arm 150/250/300

This Lower Suspension Arm used on most Chinese 150cc/250cc/300cc karts. Does not come with hardware or bushings. This A-Arms is longer than the older models. The newer A-Arms are 14.5" overall...

150cc / 250cc / 300cc Steering Gear, 45 Degree Angle

This Steering Gear is used on many 150/250 Go-Karts.   Important Information: Steering shaft is at a 45 degree angle. The 90 degree Steering Gear is now obsolete.

Upper Suspension Arm 150/250/300

This Upper Suspension Arm can be used on most 150cc/250cc/300cc go-karts. Please measure the A-Arm you are replacing to confirm proper length.   6.5" Upper A-Arm for Blazer150, Blazer150X...