Pitman Arm for Steering Shaft

Steering Shaft Pitman Arm 4" Length 3/8" Hole 3/16" Thick 3/4" Wide

1" Bore Hub with 1/4" Keyway

1" Bore Hub with 1/4" Keyway Outer Diameter 1.876"  Machined Lip 1.678" Comes with 2 Set Screws

Header Pipe, Build Your Own

Build Your Own Header Pipe 1" Diameter Fits: 212cc (Hemi and Non Hemi) 301cc 420cc We strongly recommend using the Header Support to prevent pipe from breaking. Recommended Items: Header Support 1" Muffler 1" Trumpet...

1" Sprocket and Drum Mounting Hub

Hub for Mounting Sprocket or Brake Drum to 1" Axle 4 Bolt Pattern Mount 2-7/8" & 3-1/8" 4" Outer Diameter Uses 1/4" Key Set includes: 2 Set Screws (5/16"-18) 4 Bolts 4 Lock Nuts  

150cc Flywheel Puller

150cc Flywheel Puller (Male) 27mm x 1.0mm Fine Left Hand Threads

Predator Engine Mount 2 (301cc / 420cc / 670cc)

Predator Engine Mount 2   6-3/4" x 16" 3-5/8" x 3/8" Mounting Slots   1" 90 Degree Lip on each side 1/4" (.250") Steel Plate Works with 301cc, 420cc, and 670cc Predator Engines.

Retainer Kit (18lb, 22lb, 26lb)

Retainer Kit Great upgrade for Valve Train using High Lift Camshafts such as the .275 or .308 Cams Adds more control of the Valve at higher RPMs Includes 2 Retainers and 4 Keepers Pair with 1051 Lash Caps and Stainless Steel Valves  Fits...

Silicone Header Sleeve 20"

Silicone Header Sleeve Silicone Outer Construction Fiberglass Inner Construction Does not require Wire Ties or Clamps Sleeve will smoke the first few times after it's newly installed 20" Length The Silicone Header Sleeve 20" is a high-quality and...

Max-Torque Centrifugal Clutch for Bicycle Chain 410, 415

Max-Torque Centrifugal Clutch For Bicycle Chain 410, 415 5/8" or 3/4" Center Bore with 3/16" Key Way 10 Tooth Sprocket Works with 410 and 415 Chain - 1/2" pitch Comes with Key, 2 Set Screws, Mounting Bolts and Washers Please measure your crankshaft for...

Mod2 Camshaft (212cc Tillotson / Hemi Predator / 196cc Clone / GX200)

Mod2 Camshaft  Fits a very wide range of applications This Cam has a lift measurement that is very similar to the CL1, CL2, CL3, BSP3, and other stock legal Cams, but has much more added duration to hold the Valves open longer giving you more...

Max Torque Bully Conversion Kit

Only one set of Drive Sprockets that are compatible with your Max Torque Drum Clutch, as well as Bully Style Disc Clutches, are necessary. The Kit Includes: Stamped Steel Drum 1 Large Flat Washer 1 Fiber Washer 2 Thrust Washers Installation Instructions

Front Fender Bracket, 2 Bolt Style Passenger - 150cc / 200cc XRS/X

TrailMaster 2 Bolt Front Fender Bracket   Fits: TrailMaster 150-XRS Go Kart TrailMaster 150-XRX Go Kart TrailMaster 200E-XRS Go Kart TrailMaster 200E-XRX Go-Kart 

Mod2 Camshaft (212cc Non-Hemi Predator)

212cc Non-Hemi Predator (#69730 Only) Mod2 Camshaft Fits a very wide range of applications This Cam has a lift measurement that is very similar to the CL1, CL2, CL3, BSP3, and other stock legal Cams, but has much more added duration to hold the...

Throttle Clevis

Throttle Clevis Commonly used to connect the Throttle Cable to the Throttle Arm on Top Plate Can be utilized in many other cable connecting manners No returns on this product. If you have any questions, please call before ordering.

90 Degree Fuel Filter

90 Degree Fuel Filter Fits: 196cc Clone Engines Predator 212cc Engines GX200 Engines Typically used on engines utilizing the upgraded Top Plate and Fuel Pump design. When filter is connected between carburetor and fuel pump, the fuel line is redirected...

410 x 3.50-5" Stud Tire, Original

Studded 2 Ply Tire Fits on 5" Diameter Wheel 12" Tall 3.5" Wide 

Clone PVL Flywheel

Clone PVL Flywheel Material: Die Cast Aluminum Weight: 3.8 lbs Timing: 28 Degrees Dynamically balanced and has been tested by PVL at 17,000 RPM. Steel Center Hub adds durability to keep from damaging the taper Steel Center Hub also has tapped...

18lb Valve Springs

18lb Valve Springs Not recommended for any Cam with a .274 lift or higher Billet Connecting Rod and Billet Flywheel are recommended but not required Works with both Hemi and Non-Hemi Engines No Returns on this product. If you have questions,...

Air Filter Adapter, 196cc / 212cc / 225cc Engines

Air Filter Adapter, 196cc / 212cc / 225cc Engines 2-7/16" OD Air Filter Adapter for K&N Style Air Filter Fits both Hemi and Non-Hemi Engines  

1" Hub Dual Mount Silver - Live Axle Type

1" Hub Dual Mount - Live Axle Type Silver 1" ID Rear Wheel Hub Dual Mount Bolt Pattern Accepts 1/4" and 5/16" Studs Pinch Bolt Included No returns on this product. If you have any questions, please call before ordering.