Weld On Frame Parts

Engine Mount (212cc / 225cc/ 301cc)

5 1/2" wide x 14" long 3" by 3/8" mounting slots.   1" 90 degree bend along the length on each side. Made from 3/16 material  Works with 212cc, 225 and 301cc Tillotson and Predator engines. Please use 5/16" bolts with washers to mount.

1" Bore Hub with 1/4" Keyway

OD 1.876  Machined Lip 1.678 comes with 2 set screws

2" X 2" Gusset

11 Gauge thick steel Actual size is 1 3/4" x 1 3/4".

3" X 3" Gusset

11 Gauge thick steel Actual size is 2 7/8" x 2 7/8".

3" X 3.5" Gusset

11 Gauge thick steel Actual size is 3 1/2" x 2 7/8".

3.5" Hub Flange

Weld up your own custom hubs with this 3.5" diameter hub flange made out of 3/16" mild steel. Dimensions: OD - 3.500" ID - 1.630" 3 hole pattern - 2.500" bolt circle

6" Hub Flange, Dual Pattern

Weld up your own custom hubs with this 6" diameter hub flange made out of 3/16" mild steel. Dimensions: OD - 6" ID - 1.630" 4 hole pattern - 2.875" 6 hole pattern - 5.250"

Adjustable Jackshaft Brackets, Weld-On

Weld on adjustable jackshaft brackets made in the USA out of 3/16" steel. This is the perfect kit for a wide range of mini bikes to fine tune and easily change the gear ratio. Laser cut out of 3/16" steel Must be welded onto frame 5/16" bolts and...

Bearing Hanger (One Hanger)

Bearing hangers, priced each. 2 needed per axle.  Hangers are 4" wide and 3 5/8" tall.   Works with both 2 hole and 3 hole flanges.

Engine Mount Long, Small Block

   Engine mount plate with legs for more strength. For 3-7 hp engines, has elongated mounting holes.      8 3/4" length,  7 3/4" width,  1 3/8" slots.  3/4" 90 degree angled legs for support.

Engine Mount Short, Small Block

Engine mount, flat plate with elongated holes. For 3-7 hp engines Dimensions- 11 Gauge material 12" Long 5" wide

Gusset, 5" Long, 45 Degree

Weld on gusset perfect for any 45 degree angle such as on the Mega Moto 80/105 mini bike. 11 gauge steel (.120" thick) 5.25" long 1.5" at widest point

Gusset, Doodlebug Cut-Out Set

Improve the strength and appearance of your doodlebug mini bike with our weld-on gusset kit! Specifically designed for the doodlebug mini bikes but will fit many other frames. Made in the USA out of .115" thick steel.

Gusset, Doodlebug Holey Set

Improve the strength and appearance of your doodlebug mini bike with our weld-on gusset kit! Specifically designed for the doodlebug mini bikes but will fit many other frames. Made in the USA out of .115" thick steel.

Gusset, Doodlebug Solid Set

Improve the strength and appearance of your doodlebug mini bike with our weld-on gusset kit! Specifically designed for the doodlebug mini bikes but will fit many other frames. Made in the USA out of .115" thick steel.

Header Flange, 196cc/212cc

Steel Header Pipe Flange.  3/16" Thick. Fits: 79cc/196cc/212cc Honda and Honda Clones

Header Flange, 301cc/420cc

Steel Header Pipe Flange.  3/16" Thick. Fits: 301cc/420cc Predator Engines GX270-390 Hondas

Jackshaft Bearing Washer

Weld-on washer to make your own jackshaft set-up. Used with bearing OD of  1 3/8".

Mikuni Throttle Cable Bracket

Works with the Mikuni throttle cable.

Mini Bike Axle Hangers, Weld On, DoodleBug

Weld on mini bike axle hangers specifically designed for the Baja Doodlebug mini bike but can be welded onto many other frames. These hangers are perfect for stretching the wheelbase or changing the ride height of your mini bike! Rigid, stylish, and...