TrailMaster Go Kart Parts

Large Fuel Tank (2.25 gallons)

This tank does not come with a Petcock or Fuel Cap. You can use the 150cc Vacuum Operated Petcock or the 250cc Manual Petcock. You can find the Fuel Cap here. Used on TrailMaster 150/250 Ko-Karts 18 3/4" O.A.L. Mounting Holes...

150cc / 250cc / 300cc Steering Gear, 45 Degree Angle

This Steering Gear is used on many 150/250 Go-Karts.   Important Information: Steering shaft is at a 45 degree angle. The 90 degree Steering Gear is now obsolete.

150/250/300 Steering Ball Joint

The 150/250/300 Steering Ball Joint connects the steering linkage to the steering knuckle, allowing for smooth and precise steering control. This Ball Joint is used on most 150cc/250cc/300cc karts by Hammerhead, Carter, TrailMaster, American Sportworks,...

Upper Suspension Arm 150/250/300

This Upper Suspension Arm can be used on most 150cc/250cc/300cc go-karts. Please measure the A-Arm you are replacing to confirm proper length.   6.5" Upper A-Arm for Blazer150, Blazer150X and newer 150XRS and 150XRX models (Built after December...

30 Series Driver 3/4" Bore, Aftermarket

This Aftermarket 30 Series Asymmetrical Driver comes with 3/4" Bore, with a built in 3/16" key. This is also a great replacement for the Aftermarket 30 Series TAV Kit Driver.  Used to Replace:  TrailMaster # 9.500.001 Manco # 5957 ...

30 Series 6" Driven 16mm Bore, Aftermarket

This Asymmetrical Aftermarket 30 Series Driven Pulley is most commonly used on TrailMaster, Hammerhead and Manco Go Karts with 5 HP -7 HP engines as well as domestic and Chinese TAV 30 series kits. This pulley works with 5/8" and 16mm jackshafts...

3/4" Bronze Bushing, 20/30 Series Comet

The Comet Bronze Bushing is a top-quality component designed for use in the 30 series 3/4" drive system.    Bronze idler bushing used on 20 and 30 series driver pulleys for a 3/4" diameter crankshaft.   Measurements: 1 1/16" - ID 1 3/16...

Strut Spindle for Mid XRS

The Strut Spindle for the Mid XRS is an essential component of the go-kart's suspension system. This strut spindle is made from high-quality materials and is designed to provide reliable and consistent performance in a variety of driving conditions. It...

Strut Spindle for MidX/Blazer200R

The Strut Spindle for the MidX/Blazer200R is an essential component of the go-kart's suspension system.    80t strut. Used on Hammerhead 80T and TrailMaster Midxrx karts with 6.5hp engine. This strut does not work with the 80cc Hammerhead or...

Strut Spindle, TrailMaster Mini

The Strut Spindle for the TrailMaster Mini is an essential component of the mini go-kart's suspension system.    Used on Mini size kartsStem 9 7/8"Axle 2 1/2"2.000.031 Passenger Side2.000.032 Driver Side

Strut and Spindle Support, 150/200/250/300cc

The Strut and Spindle Support, is an essential component of the suspension system on 150/200/250/300cc go-karts.    Strut used on many Chinese karts 150/200/250 and 300cc. Fender bracket bolts to the strut with two bolts. Axle length is 3...

Performance Carburetor with Upgraded Jets, 150cc / 200cc

The 150cc Carburetor with Upgraded Jets is a high-quality and reliable carburetor designed for use in a variety of vehicles. This carburetor features upgraded jets that provide improved fuel flow and air intake, resulting in better engine performance and...

150cc Choke, Bystarter

The 150cc Choke, Bystarter is a high-quality and reliable component designed to be used to regulate the flow of air and fuel into the engine during startup, ensuring that the engine starts smoothly and runs efficiently.    150cc electric...

150 XRX Speedometer

The 150 XRX Speedometer is a high-quality and reliable speedometer.  The speedometer is easy to read and features a clear display that shows speed in miles per hour (mph) or kilometers per hour (km/h), depending on your preference...

Cable Equalizer

    Used to equalize the cables used for forward and reverse operation. This replaces the original plastic style. Used on 150cc American Sportworks, TrailMaster and late model Hammerhead karts with internal reverse.

80T Brake Reservoir

  Brake reservoir used on TrailMaster MidXRX, Hammerhead 80T, Mudhead and American Sportworks mid-size karts.   Please look at the picture and make sure this will work with your unit.

Brake Reservoir, 150/200cc Go-Kart

The Brake Reservoir, 150/200cc Go-Kart is a high-quality and reliable reservoir designed for use in go-karts and other small vehicles.    Replacement for the 6.000.076 150 Master Cylinder.    Please look at pictures to make sure this...

Front Drive Chain #420 48P, TrailMaster MiniX

The Front Drive Chain #420 48P.    For TrailMaster Minixrs & XRX models. 420 x 48P chain.   2" length Master Link included in price.

Go-Kart Axle, Mini X

The Mini X/S Axle is a high-quality and reliable axle designed for use in go-karts and other small vehicles.    Axle for the mini karts used by Hammerhead (Shark), Trailmaster (Mini XRS/XRX) and American Sportworks. Axle comes complete with 3...

Jackshaft Sprocket, 10t #40/41/420

The Jackshaft Sprocket with 10 teeth is compatible with chains #40/41/420. It is made to withstand high torque and is commonly used in go-karts, mini bikes, and other small vehicles. The sprocket is made of sturdy material to ensure durability and...