GoPowerSports

Juggernaut, Super 30 Series Driver

The Juggernaut, Super 30 Series Driver is a high-performance driver that has been tested up to 8500 RPMs. It features a bore of 3/4" (.750"), a key-way of 3/16" (part #1031 not included), and a 3/4"...

12T Hilliard Centrifugal Clutch 3/4" Bore, #35

Centrifugal Clutch fits most engines with a 3/4" crankshaft and running #35 chain. Manufactured by Hilliard Sprocket has 12 Teeth for chain size #35 Fits on 3/4" crankshaft Comes with 4 weights...

212cc Electric Start Engine, 7 HP 3/4" Horizontal Shaft Gasoline Engine for Go-karts and Minibikes

212cc Electric Start Engine, 7 HP 3/4" Horizontal Shaft Gasoline Engine for Go-karts and Minibikes. This engine features both electric and recoil start options, a 3/4" horizontal keyed shaft, and a...

Juggernaut Tuner Kit Stage 3

Juggernaut Tuner Kit, Stage 3 Raises Stall Engagement to approximately 3,750 RPMs When paired with the Juggernaut Torsion Springs Set, the Stall Engagement raises to approximately 4,000 RPMs...

7/8" Billet Handlebar Risers, Short

7/8" Billet Aluminum Handlebar Risers Single Bolt Mount on bottom of Risers Includes: Pair of Short Billet Risers Clamp Hardware Mounting Hardware Dimensions: 2.88" Overall Height 2...

Hydraulic Front Brake Kit, Coleman CT200U

Coleman CT200U Hydraulic Front Brake Kit Included with the kit: Front wheel assembly 8" front wheel M15 axle Brake disc Bearings and inner crush sleeve included and installed Hydraulic...

Juggernaut Tuner Kit Stage 1

Juggernaut Tuner Kit, Stage 1 Raises Stall Engagement to approximately 2,850 RPMs When paired with the Juggernaut Torsion Springs Set, the Stall Engagement raises to approximately 3,150...

Mini Bike 145x70-6 V Tread Rear Wheel Assembly Kit, Coleman CT100

Real Wheel Assembly Kit Includes: 145x70-6 V Tread 6" Rear Wheel 75T #35 Sprocket Brake Disc Rear Axle Wheel Spacers Fits: Coleman CT100 Mini Bikes Many other applications

Mini Bike Brake Kit, Coleman CT100

Brake Kit Includes: Brake Lever Brake Cable, 53"  Brake Caliper Fits: Coleman CT100 Mini Bikes Many other applications

Shred Head, Performance Cylinder Head Kit

Shred Head Standard Head is a 28.5/24  5.5mm Valve Stem Stainless Head is 28.5/25 5.5mm Valve Stem Chamber size is 18cc Wide exhaust studs for better positioning of exhaust port. (Your...

12T Centrifugal Clutch 5/8" Bore, #35

Centrifugal Clutch 12 Tooth 5/8" Bore #35 Chain No Set Screws  

12" Mini Bike Seat, Coleman CT100

12" Mini Bike Seat Fits: Coleman CT100 Mini Bikes Features: 12" Long 6" Wide at Front 7" Wide at Back 2.5" Thick in Front 4" Thick in Back Takes 6mm Bolts (Not Included) Black Vinyl for easy clean...