Engines

HP Lash Caps - Set of 2

5.5mm Ultra Light Lash Caps Fits: First Generation 212cc Predator Engines Hemi 212cc Predator Engines 196cc Clones Engines Honda GX200 Engines No returns on this product. If you have any questions, please call before ordering. 

Chromoly Push Rods: All 6.5HP Small Blocks, Cut To Length

High Strength Cut To Length Chromoly Push Rods When shortening the columns more that 3/8" it will be necessary to re-size the hole with a .125" reamer to a depth of .250" Once the length has been adjusted, clean and deburr the columns, apply Loctite...

Chromoly Push Rods: 5.26"

Heavy Duty Chromoly Push Rods 5.26" Long Considerably stiffer than Stock Push Rods Use with all HD Springs Capable of 10,000 RPM+ Sold as a pair The following are recommendations only and may not work for all applications. See notes for...

Chromoly Push Rods: 5.54"

Heavy Duty Chromoly Push Rods 5.54" Long Considerably stiffer than Stock Push Rods Use with all HD Springs Capable of 10,000 RPM+ Sold as a pair The following are recommendations only and may not work for all applications. See notes for...

Fitting, Pulse/Vent, 1/4" Hose

Fitting, Pulse/Vent, 1/4" Hose Installed on the Valve Cover / Engine Block / Side Cover to pulse the Fuel Pump DIY Instructions: Drill Hole with a 11/32" Drill Bit Use NPT 1/8" -27 NPT Threads with a 1/4" Hose Barb No returns on this product...

Stainless Steel Valve Kit: 212cc Predator

Fits: 212cc Hemi Predator Newer 212cc Non Hemi Predators (Will need to either replace guides to 5.5mm, or ream) Other Details: A must have for applications above 8,000 RPMs Valves will need to be lapped in to Seats Will not fit 1st Generation...

Stainless Steel Valve Kit: 196cc Clones / GX200

Fits: Honda GX200 Engines Honda Clone Engines 1st Generation Predator 212cc Engines Other Details: A must have for applications above 8,000 RPMs Valves will need to be lapped in to Seats Will not fit 2nd & 3rd generation Harbor Freight...

Stage 2: 420cc Hemi Predator / GX390 Performance Kit

Stage 2: 420cc Hemi Predator / GX390 Performance Kit Fits: Hemi Predator 420cc Engines Honda GX340-GX390 Engines Key Features:  High-Performance Components: The kit includes a 6623 Billet Flywheel, 6272 Billet Connecting Rod, and...

Exhaust Gasket 196cc / 212cc

Exhaust Gasket 196cc / 212cc Fiber Exhaust Gasket for 212cc Predators Engines Stud Hole Pattern: 1-13/16" Fits: Predator 212 Hemi and Non-Hemi Engines Tillotson 196 / 212 /225 Engines Honda GX200 196cc Clones

Valve Cover Gasket, Predator 212 Hemi

Predator Hemi Valve Cover Gasket Stock replacement Valve Cover Gasket

.010" Head Gasket: 196cc Clones, GX200

.010" Head Gasket: 196cc Clones, GX200 Viton Coated Head Gasket used to raise Compression  Bore Size: 68mm / 2.68"

.010" Head Gasket: 212cc Non-Hemi Predator

.010" Head Gasket: 212cc Non-Hemi Predator Viton Coated Head Gasket used to raise Compression Bore Size: 70mm / 2.756" Due to differences in Chinese blocks and dowel pin placement/size, enlargement of the holes may be required.

Rubber Valve Cover Gasket

Rubber Valve Cover Gasket Tillotson# 138190038 Does NOT fit Tillotson 212cc Engines Used on: Used on 196cc and 225cc Tillotson Engines Honda GX200 Engines Non-Hemi Predator 212cc Engines No returns on this product. If you have any...

K&N Recharger Pack

The K&N Recharger Pack is an essential kit for maintaining the performance of your K&N air filter. It contains a 12oz bottle of specially formulated cleaner and an 6.5oz bottle of oil, both of which are designed to clean and recharge your K&N...

Header Pipe, Stock Clone Open

Header Pipe, Stock Clone Open Wide Power Range .930 x 1.060 x 1.220 x 20.5 Fits: Hemi & Non Hemi 196cc / 212cc Engines Honda GX160 & GX200 and Honda Clone Engines We strongly recommend using the Header Support to prevent...

Honda CT-70 Carburetor

Honda CT-70 Replacement Carburetor Complete Fits Engines 1969 - 1977 If you have a newer model, a Pre-1977 Manifold is needed Product Details: Mounting Holes Distance: 48mm Intake: 16mm ID Uses Air Filter with 34mm ID GoPowerSport's version...

300cc Drive Belt 856-23

TrailMaster 300cc Go Kart Drive Belt   Marked Number on the Belt: 856-23

Cylinder Head Bolt, M8x60, Hardened

Cylinder Head Bolt M8x60 Grade 8 Fits: 212cc Tillotson Engines GX200 Engines 212cc Predator Engines Honda Clone Engines No returns on this product. If you have any questions, please call before ordering. 

Header Pipe Allen Bolts With Safety Wire

Header Pipe Allen Bolts With Safety Wire Drilled for Safety Wire Sold in a Set Fits: 212cc Tillotson Engines GX200 Engines 212cc Predator Engines Honda Clone Engines   No returns on this product. If you have any questions, please...

ARC Billet Rod Bolts (Pair)

ARC Billet Rod Bolts (Pair) 1-1/4" LG HD Torque to 170 in/lbs High Tensile Strength Fits Billet Rods In: GX200 Engines Honda Clone 212cc Engines Predator 212cc Engines