Driver Pulleys

Juggernaut Tuner Kit Stage 3

Juggernaut Tuner Kit, Stage 3 Raises Stall Engagement to approximately 3,750 RPMs When paired with the Juggernaut Torsion Springs Set, the Stall Engagement raises to approximately 4,000 RPMs Allows engine to idle at a higher RPM and moves...

Juggernaut Tuner Kit Stage 2

Juggernaut Tuner Kit, Stage 2 Raises Stall Engagement to approximately 3,100 RPMs When paired with the Juggernaut Torsion Springs Set, the Stall Engagement raises to approximately 3,350 RPMs Allows engine to idle at a higher RPM and moves...

Driver Washer, 20/30 Series

"Pacman" Washer 20 & 30 Series Torque Converter Driver Washer Applied outside of the 20/30 Series Driver Key Slot to mate with the Driver 5/16" Bolts fit center of Washer  

780 Driver Clutch

780 Series Driver Clutch NOT compatible with Reverse Gear Boxes or Differentials  DO NOT RUN WITHOUT A BELT Fits: 1" Crankshafts with 1/4" keyway Predator 670cc Engines Most 18-30 HP Engines Many use this set up for Golf...

44 Series Magnum Driver 1" Bore, Comet

The 44 Series Magnum Driver with a 1" bore by Comet is a high-quality clutch system designed to provide reliable and consistent performance. This driver is specifically designed for use with heavier and more powerful engines, making it a popular choice...

Torque Converter Alu Die Cast Weight Assembly, 20/30 Series

The Torque Converter Alu Die Cast Weight Assembly is designed for use with 20/30 series torque converters. It is made of high-quality aluminum die-cast material, which ensures durability and long-lasting performance. This weight assembly is built to...

Fluorescent Yellow Garter Spring for Driver Unit, 20/30 Series

The Fluorescent Yellow Garter Spring is a must-have accessory for your 20/30 Series Driver Unit. This high-quality spring is designed to provide excellent grip and traction on your unit's clutch, ensuring that your machine runs smoothly and efficiently...

Red Upgraded Spring, 40 Series Driver

Red Upgraded Spring, 40 Series Driver Set of 3 Red Upgraded Springs for 40 Series Driver Increases engagement from 1,600 RPM's to 2,000 RPM's Pairing these with the Medium Weight Rollers, Clutch Engagement will be stalled to 2,600 RPM's.

40 Series Driver 1" Bore, Comet

40 Series Comet Driver 1" Bore Uses 7/8" Wide Belt Rated for 8HP-16HP Engines

Yellow Comet Springs, 40 Series

40 Series Yellow Comet Springs Set of 3 per order

150cc Driver Clutch, Variator

150cc Driver Clutch Variator - CVT Front Pulley Assembly Key Specifications: Compatible with 150cc 4-stroke GY6 engines Driving wheel inside diameter: 24mm Driving wheel outside diameter: 107.5mm Fan inside diameter: 14mm Fan outside diameter:...

20 Series Driver 3/4" Bore, Comet

 This 20 Series Symmetrical Driver Pulley is made in the USA by Comet. 3/4" Bore Built In 3/16" Key

30 Series Driver 3/4" Bore, Comet

 This 30 Series Asymmetrical Driver Pulley is made in the USA by Comet. 3/4" Bore Built in 3/16 Key

30 Series Driver 1" Bore, Comet

Made in USA by Comet,   1" bore 30 series driver, quality replacement driver .   #203603-219554COMET

30 Series Driver 1" Bore - Aftermarket

1" bore 30 series driver, quality replacement driver not made by Comet.   If you have an 8hp or above engine recommend upgrading to a 40 series setup. This 30 series will only hold up to easing around flat surface riding.  (no warranty if...

40 Series Driver 1" Bore, Aftermarket

  40 series driver pulley 1" bore uses 7/8" wide belt. High quality aftermarket unit not made by Comet.

3/4" Bronze Bushing, 20/30 Series Comet

The Comet Bronze Bushing is a top-quality component designed for use in the 30 series 3/4" drive system.    Bronze idler bushing used on 20 and 30 series driver pulleys for a 3/4" diameter crankshaft.   Measurements: 1 1/16" -...