Manifold For Mikuni VM 22 w/ Gasket

Manifold For Mikuni VM 22 w/ Gasket

It works great. This is a great place for performance parts ! Thank you gopowersports!!!!!!

I’ve used a couple of these in Honda clones and Honda and the only problems I had were the gasket not sealing good enough to the head. I used some rtv and it fixed the problem, I would also recommend using some blue loctite in the bolts.

Had to make a gasket. The ones sent was for predator carb. Had to make the one from the manifold to the motor. So why does it come with the wrong ones?I need to order more stuff at the beginning of the month. Not sure if I'm going to buy from gopowersports or omb wharehouse

works fine with my mikuni carb 22mm

The part looks great, should work perfectly with the mikuni carb I'm putting on a predator 212 for my kart build. Will be ordering more soon.

Manifold For Mikuni VM 22 w/ Gasket

On a Tiillotson 212E it bolts up to the head but the manifold port does not fit. when you bolt it up you can see the edge of the head in the manifold. If you want it to fit the port you will have to slot the head side of the manifold to get the port to fit

Just what I needed to finish my build.

Manifold For Mikuni VM 22 w/ Gasket