Product Description
The Juggernaut, Super 30 Series Driver is a high-performance golf club driver that has been tested up to 8500 RPMs. It features a bore of 3/4" (.750"), a key-way of 3/16" (part #1031 not included), and a 3/4" wide asymmetrical belt. With an engagement of 2,500 RPM and RPM capabilities of 8,500+ RPM, this driver is designed for high HP small block engines up to 15hp (HP rating may vary depending on the application). The Super 30 Series Driver features an all-new design with 3 rollers and 6 springs, eliminating the need for adjustments and limiting/eliminating belt slippage. It offers improved reliability and performance, making it compatible with all 30 series TAV kits with 3/4" bore (comet and aftermarket). Despite its slightly larger diameter than a regular 30 series driver, the Juggernaut, Super 30 Series Driver still works with the same covers and belt. Whether you're a beginner or an experienced golfer, this driver is a great choice for anyone looking to improve their driving distance and accuracy.
The Juggernaut (Exclusively at GoPowerSports) is everything the original 30 series drivers lacks under load. No longer do you have to sacrifice your engines power or rpm capabilities! With this new Super 30 Series Driver, you can take full advantage of a high HP high RPM small block engine (196/212/225). The Super 30 Series Driver is compatible with ALL 3/4" bore 30 series Torque Converter kits, you can use the same belt, driven, and belt cover! This driver is recommended to be used with higher RPM engines, Stage 2 or higher. On a stock motor running at 3600 RPM you will NOT see any difference in performance and it may effect top end MPH. Running 4000+ RPM is where the Juggernaut shines.
Some of the newer Predator engines are coming with a crankshaft that is slightly bigger than 3/4" (.750"). Please mic your crankshaft before ordering.
Features and Specs:
- Has been tested up to 8500 RPMs
- Bore: 3/4" (.750")
- Key-way: 3/16", NOT INCLUDED, use part #1031
- 3/4" wide asymmetrical belt
- Engagement: 2,500 RPM
- RPM Capabilities: 8,500+ RPM
- All new design with 3 rollers and 6 springs
- No adjustments needed
- Limits/Eliminates belt slippage
- Improved Reliability and Performance on high HP small block engines up to 15hp, the HP rating may vary due to the application.
- Compatible with all 30 series TAV kits with 3/4" bore (comet and aftermarket)
- Slightly larger diameter then a regular 30 series driver but still works with the same covers and belt
Things to know:
- It is highly recommended to use an impact gun to install this and all drivers. Hand tight is not tight enough.
- Do not run without a belt
Product Videos
Custom Field
Product Reviews
332 Reviews Hide Reviews Show Reviews
-
Haven't used it yet haven't got my stage 2...
Haven't used it yet haven't got my stage 2 tilison motor yet
-
Juggernaut
Put the juggernaut on a race ready 196CC, huge difference in high RPM power.
-
The...
This torque converter has been great so far. I, like many others experienced a loss in top end speed compared to the straight chain setup I was running. But I’m willing to sacrifice for the the torque this converter creates. Feel like my bike is finally perfectly balanced for street AND off-road use. Great product and as always snappy and expedient service form GoPower.
-
Best driver on the market by far!!!!
If you have a high rpm or just a mild built engine then this is the driver for you. It is also the only 30 series driver I know of to have the keyway cut out, and that works the best with the 5/8 shaft adapter on the coleman ct200 bikes.
-
Jugernaut
Excellent driver clutch, lockup comes strong and keeps on right up to 7000
-
Awesome Juggernaut. Best torque converter out...
Awesome Juggernaut. Best torque converter out there.
-
Juggernaut
Go Powersports is wanting us to die ( figure of speech just throwing it out there ) holy crap this baby really holds up well. Definitely worth the extra money and if you're doing a ninja build a highly recommend it go Powersports is the only way to go when you're trying to buy upgraded parts now I need to buy another one for my next project this baby holds up so good I can't express the power it puts down
-
Great...
Heck of an upgrade
-
Juggernauts
It works great
-
The...
I had gone through three clutches because I have the tillonson 212 and it had way too much power for the clutches that I had. I was also going through lots of belts but after I bought this clutch I've never replaced one belt yet. This is absolutely worth the extra money