Hardware

Tillotson 212E Exhaust Manifold Stud

Single Tillotson Exhaust Manifold Stud for the 212E and 212EE Engines.  Each engines takes 2 Exhaust Manifold Studs.

Tillotson 212E Intake Manifold Stud

Single Tillotson Intake Manifold Stud for the 212E and 212EE Engines.  Each engine takes 2 Intake Studs.   Stud, Carb Mounting-S

Tillotson 212E Governor Assembly

Tillotson Governor Assembly for the 212E and 212EE Engines.  Plastic spool.   Fits all 196,212,223,224cc engines

Tillotson 212E Throttle Return Spring

Tillotson Throttle Return Spring for the 212E and 212EE Engines.

Tillotson 212E Governor Arm Shaft

Single Tillotson Governor Arm for the 212E and 212EE Engines.

Tillotson 212E Throttle Rod

Single Tillotson Throttle Rod for the 212E and 212EE Engines.

Tillotson 212E Governor Rod

Single Tillotson Governor Rod for the stock 212E Engines.  Will also fit the 212EE Engine.   Fits Predator and Honda clones engines

Tillotson Exhaust Manifold Stud - Single

Single Exhaust Stud for the Tillotson 212 Engines.  May also be used with Honda and Honda Clone small block engines.

Tillotson Crankshaft Washer

Plain Steel Crankshaft Washer from Tillotson.  5/16" ID Washer.

Clutch Mount Bolt Kit

Kit to help hold your clutch on your engine's crankshaft.  Typically used with small block engines such as the Tillotson 196/212/225 Engines and Predator 212 Engines. Mount Bolt Kit includes: (1) 5/16" Fine Thread Bolt x 1" Long (1) 5/16" Flat...

Tillotson Throttle Return Spring

Fitment: Tillotson 196/212 Predator 212 Honda GX200 196cc Honda Clones

Tillotson 196/212/225 Governor Spring

Fitment: Tillotson 196/212 Predator 212 Honda GX160/200 196cc Honda Clones

Tillotson Valve Locking Nut

OEM replacement valve locking nut / rocker adjuster jam nut for the Tillotson 196RS and 225RS engines.

Self Tapping Bolt, 1/4", Governor Hole

1/4" bolt with a 10mm hex head with self tapping threads used to plug the governor hole on top of the block and the governor shaft hole behind the flywheel. Eliminates the need for a tap. Install with a 10mm socket and an impact. 

Billet Clutch Washer w/ Bolt, Heavy Duty

Spice up your ride with one of these stylish and sleek clutch washers. Perfect look and size for the Juggernaut driver, disc clutches, and drum clutches. Washer comes with a 5/16-24 x 1" bolt and small 5/16" compression washer. Dimensions: OD: 1...

Stud Kit: Valve Cover

High quality stud kit for use on 4 bolt small block valve covers such as the 196cc clones, 212cc Predators, GX200, and the Tillotson 196cc and 212cc. These studs are long enough to work with a valve cover spacer and if you choose can be cut shorter. 

Tillotson Drain Plug Washer

 No Returns on this product, if you have questions about it, Please call before ordering.

Tillotson Valve Adjusting Nut

 No Returns on this product, if you have questions about it, Please call before ordering.

M14 Nut

M14 Nut for M14 Bolts. This is for a single M14 Nut.  

M6*20 Flange Bolt

 No Returns on this product, if you have questions about it, Please call before ordering.