GoPowerSports

150cc Choke, Bystarter

The 150cc Choke, Bystarter is a high-quality and reliable component designed to be used to regulate the flow of air and fuel into the engine during startup, ensuring that the engine starts...

Throttle Cable, Manco 81"

  Eyelet on one end where cable bolts to the throttle pedal, other end is straight.  Conduit length is 74.5" total length of cable end to end is 81".Replacement Part for:Manco #1496

4" Manco Brake Band with Heavy Clip

Manco brake band with heavy clip, used with 4" brake drum. This Brake Band is stouter than the 1036 Brake Band.  Used with go-karts and minibikes that use a 4" brake drum.   Note...

Cable Equalizer

    Used to equalize the cables used for forward and reverse operation. This replaces the original plastic style. Used on 150cc American Sportworks, TrailMaster and late model Hammerhead...

80T Brake Reservoir

  Brake reservoir used on TrailMaster MidXRX, Hammerhead 80T, Mudhead and American Sportworks mid-size karts.   Please look at the picture and make sure this will work with your unit.

Manco Live Axle Sprockets #35 Chain

Live Axle Sprocket for #35 Chain.  This steel sprocket comes in two different sizes: 1420 - 60T Live Axle Sprocket for #35 chain, 6 bolt pattern measuring 5 1/4", center hole is 4 9/16",...

3/8" Tie Rod End, Left Hand Threading

The 3/8" Tie Rod End, Left Hand Threading is a high-quality and reliable tie rod end designed for use in a variety of automotive and mechanical applications.  Left Hand Threading not...

3/8" Tie Rod Ends, Right Hand Threading

The 3/8" Tie Rod Ends, Right Hand Threading are high-quality and reliable tie rod ends designed for use in a variety of automotive and mechanical applications.  Right Hand Threading not...

Brake Reservoir, 150/200cc Go-Kart

The Brake Reservoir, 150/200cc Go-Kart is a high-quality and reliable reservoir designed for use in go-karts and other small vehicles.    Replacement for the 6.000.076 150 Master Cylinder...

Go-Kart Axle, Mini X

The Mini X/S Axle is a high-quality and reliable axle designed for use in go-karts and other small vehicles.    Axle for the mini karts used by Hammerhead (Shark), Trailmaster (Mini...

Manco Sprocket upgrade, 36T- 16T, 13063 - Comes with #35 3ft Chain

The Manco Sprocket Upgrade, 36T-16T,(5/8" ID) 13063 - Comes with #35 3ft chain.   (Models 425 - 426 karts)   This replaces part# 12994 (36t - 12t) That is no longer available...

3/4" ID Bearing, 1 3/4" OD, Common

The 3/4" ID Bearing, 1 3/4" OD.    Sealed only on the outside of bearing   3/4" Inside Diameter 1-3/4" Outside Diameter Standard bearing used on Manco go-karts