Minibike

Mid Rear Axle Bearing E6005-2RS

  Rear Axle bearing 6005 for Mid size karts Each axle requires 2 bearings. Inner Diameter - 25mm Outer Diameter - 47mm

Shock 12.75", Front 200/300cc & Mid X Rear

Go Kart Coil Shocks   Fits: TrailMaster Mid XRX (Rear) TrailMaster Mid XRX/R (Rear) TrailMaster Blazer 200 (Rear)  TrailMaster Blazer 150 (Front)  HammerHead 80T Dimension: 12 3/4" Eye to Eye    

Mini Rear Wheel 6"

6" Live Axle Wheel Fits TrailMaster and HammerHead Mini size Go Karts Works with 5/8" or 16mm Axle with 3/16" Key Way Hub Depth: 2-1/2" Deep      

6" Front Wheel, TrailMaster Mini / Mid XRS

TrailMaster Mini / Mid XRS Front Wheel Wheel Diameter: 6" Wheel Width: 2-1/4" Bearings not Included - Takes (1) 6201 Bearing and (1) 6202 Bearing  

Mini Brake Caliper

Mini Brake Caliper   Fits: TrailMaster Mini Go Karts HammerHead Mini Go Karts Many other Mini and Mid Size Go Karts that use the Mini Caliper TrailMaster Storm 200 Mini Bike (Must use the original mounting bracket from the original caliper or...

#50 Chain Master Link

#50 Master Link  5/8" Pitch

Rear Mag Wheel 10"

Rear Mag Wheel 10"- Brushed Aluminum Center Hole: 4 1/4" Diameter.  Bolt Hole Pattern: 5 3/8" (136mm) Measuring Across Center Hole Bead to Bead: 8.25" Wide

8" Mag Go-Kart Front Wheel

Front Mag Wheel - Brushed Aluminum.  Center Hole: 3 1/2" Diameter.  Bolt Hole Pattern: 4 5/16" (110mm) Measuring Across Center Hole

Steel 10" GT Rear Wheel

10" Rear Wheel that fits 21x10-10 and 22x10-10 tires.   Used With: TrailMaster Go Karts American Sportworks Go Karts Many Other Chinese Go Karts Dimensions: 9" Wide Center Hole: 4 1/4" Bolt Hole Spacing: 5 3/8" (136mm) Measuring Across Center...

8" Steel GT Go-Kart Front Wheel

Steel 8" Wheel used on the front of many Chinese Go Karts. This wheel is commonly used with 19x7-8 or 20x7-8 tires. 7" Wide Center Hole: 3 1/2" Diameter Bolt Hole Pattern: 4 5/16" (110mm) Measuring Across Center Hole

5/8" ID Sealed Bearing, 1 3/8" OD

Standard sized wheel and jackshaft bearing used on most Go Karts and Mini Bikes. 5/8" Inside Diameter 1-3/8" Outside Diameter Outer Snap Ring (Can be Taken Off)

12T GPS Centrifugal Clutch 3/4" Bore, #35

Quality Aftermarket Centrifugal Clutch. Fits all 3 HP - 7 HP engines with a 3/4" crank. Commonly used on one wheel Go Karts with rear tires that are no larger than 15" tall. For Go Karts with larger tires and/or Live Axles, we highly suggest...

12T Max-Torque Dual Centrifugal Clutch 3/4" Bore, #35

Max Torque Dual Sprocket Centrifugal Clutch is made in the USA and typically used on two speed Mini Bikes. It will not work with a double wide chain. You must use 2 strands of single wide chain to function properly. 3/4" Bore Dual 12...

12T Max-Torque Centrifugal Clutch 3/4" Bore, #35

Max Torque Centrifugal Clutch is made in the USA. 3/4" Bore 12 Tooth Fits with #35 Chain Includes 1-3/16" Key Engages at 2200 RPMs The 12T, 3/4" Bore, Max Torque Centrifugal Clutch, #35 is a high-quality clutch designed to provide...

Brake Puck, Manual Caliper

The Brake Puck, Manual Caliper is an essential component of any manual brake system. It is designed to fit securely into the caliper and provide a stable surface for the brake pads to press against, allowing for effective and reliable stopping power...

8" Live Axle Wheel, 1" Bore

The 8" Live Axle Wheel is a high-quality wheel designed for a variety of applications, including go-karts, utility carts, and other small vehicles. The wheel is made from durable materials, ensuring it can withstand the wear and tear of regular use. The...

20 Series Driver 1" Bore, Comet

This 20 Series Symmetrical Driver Pulley is made in the USA by Comet.  1" Bore Uses Symmetrical Belt (angled on both sides).  If you have an 8+ HP engine, we recommend upgrading to a 40 Series TAV Kit.

20 Series Driver 3/4" Bore, Aftermarket

Aftermarket 20 Series Symmetrical Driver. 3/4" Bore Built In 3/16" Key

20 Series Driver 3/4" Bore, Comet

 This 20 Series Symmetrical Driver Pulley is made in the USA by Comet. 3/4" Bore Built In 3/16" Key

30 Series Driver 3/4" Bore, Comet

 This 30 Series Asymmetrical Driver Pulley is made in the USA by Comet. 3/4" Bore Built in 3/16 Key