GoPowerSports

26MM GPS Mikuni-Style Carburetor (Aftermarket)

The 26MM GPS Mikuni-Style Carburetor is an aftermarket carburetor designed to provide excellent performance and reliability for your dirt bike or ATV. It is made from high-quality materials and...

15lb Valve Springs

The 15lb Valve Springs are high-quality valve springs designed for use in a variety of engines. These valve springs are made from durable materials that can withstand high pressure and extreme...

Fitting, 90 Degree Elbow, 1/4" Hose

Fitting, 90 Degree Elbow, 1/4" Hose 1/4" Barb with 1/8-27 NPT Threads Typically used on Valve Covers or anywhere that needs a 90 Degree Fitting May be Brass or Silver in color No returns on this...

65lb Dual Valve Springs, GX240-390, Predator 301cc / 420cc

65lb Dual Valve Spring Set Approximately 65lbs at 1.125" Installed Height with 140lbs Open Pressure (.375 Lift) Approximately 60lbs at 1.20" Installed Height with 140lbs Open Pressure (.375...

HP Lash Caps - Set of 2

5.5mm Ultra Light Lash Caps Fits: First Generation 212cc Predator Engines Hemi 212cc Predator Engines 196cc Clones Engines Honda GX200 Engines No returns on this product. If you have any...

Fitting, Pulse/Vent, 1/4" Hose

Fitting, Pulse/Vent, 1/4" Hose Installed on the Valve Cover / Engine Block / Side Cover to pulse the Fuel Pump DIY Instructions: Drill Hole with a 11/32" Drill Bit Use NPT 1/8" -27 NPT...

Stainless Steel Valve Kit: 212cc Predator

Fits: 212cc Hemi Predator Newer 212cc Non Hemi Predators (Will need to either replace guides to 5.5mm, or ream) Other Details: A must have for applications above 8,000 RPMs Valves will need to be...

Stainless Steel Valve Kit: 196cc Clones / GX200

Fits: Honda GX200 Engines Honda Clone Engines 1st Generation Predator 212cc Engines Other Details: A must have for applications above 8,000 RPMs Valves will need to be lapped in to Seats Will not...

Exhaust Gasket 196cc / 212cc

Exhaust Gasket 196cc / 212cc Fiber Exhaust Gasket for Old Style 212cc Predators Stud Hole Pattern: 1-13/16"

.010" Head Gasket: 196cc Clones, GX200

.010" Head Gasket: 196cc Clones, GX200 Viton Coated Head Gasket used to raise Compression  Bore Size: 68mm / 2.68"

.010" Head Gasket: 212cc Non-Hemi Predator

.010" Head Gasket: 212cc Non-Hemi Predator Viton Coated Head Gasket used to raise Compression Bore Size: 70mm / 2.756" Due to differences in Chinese blocks and dowel pin placement/size,...

Rubber Valve Cover Gasket

Rubber Valve Cover Gasket Tillotson# 138190038 Does NOT fit Tillotson 212cc Engines Used on: Used on 196cc and 225cc Tillotson Engines Honda GX200 Engines Non-Hemi Predator 212cc...