Comet

780 Driver Clutch

780 Series Driver Clutch NOT compatible with Reverse Gear Boxes or Differentials  DO NOT RUN WITHOUT A BELT Fits: 1" Crankshafts with 1/4" keyway Predator 670cc Engines Most 18-30 HP Engines Many use this set up for Golf...

44 Series Magnum Driver 3/4" Bore, Comet

The 44 Series Magnum Driver with a 3/4" bore by Comet is a high-quality clutch system designed to provide reliable and consistent performance. This driver is specifically designed for use with lighter and less powerful engines, making it a popular choice...

44 Series Magnum Driver 1" Bore, Comet

The 44 Series Magnum Driver with a 1" bore by Comet is a high-quality clutch system designed to provide reliable and consistent performance. This driver is specifically designed for use with heavier and more powerful engines, making it a popular choice...

780 Driven Pulley 3/4" Bore, Comet

The 780 Driven Pulley 3/4" Bore from Comet is a high-quality component that is designed to work seamlessly with your go-kart or mini bike. This driven pulley is an essential part of the torque converter system, helping to transfer power from the engine...

40 Series Driven 5/8" Bore, Comet

The 40 Series Driven 5/8" Bore from Comet is an excellent clutch choice for your go-kart or mini bike. This high-performance clutch is designed to provide your vehicle with the power and torque it needs to handle tough terrain, making it a reliable and...

40 Series Driven 3/4" Bore, Comet

40 Series Driven Pulley, made in the USA by Comet. 7 5/8" diameter with a 3/4" center bore. Used with 40 series 7/8" wide belt.   Mounts inboard.  3/16" Keyway

Bellville Washer

A Belleville Washer, also known as a conical spring washer, is a type of washer that is designed to provide a high degree of spring tension and shock absorption. These washers consist of a cone-shaped disc with a slightly curved shape, which allows them...

30 Series Driven Rebuild Kit

The 30 Series Driven Rebuild Kit is the perfect solution for maintaining the performance of your go-kart's 30 Series torque converter driven system. This kit includes all the necessary components to rebuild the driven pulley, such as the driver face,...

2,600 RPM Stall Kit, 40 Series

2,600 RPM Stall Kit, 40 Series Includes: (3) Red Springs (3) Medium Weight Cam Rollers Stalls engagement of Driver from 1,600 RPM's to 2,600 RPM's. Does not work with Magnum 44c Series Driver.

Medium Weight Cam Rollers, 40 Series Driver

Medium Weight Cam Rollers, 40 Series Driver Set of 3 Medium Weight Cam Rollers Raises RPM Engagement of 40 Series Driver RPM engagement will be 2,200 RPM's with Stock Springs. Pair these with the Red Springs for 2,600 RPM Engagement.

30 Series Driver 3/4" Bore, Comet

 This 30 Series Asymmetrical Driver Pulley is made in the USA by Comet. 3/4" Bore Built in 3/16 Key

20 Series 6" Driven 5/8" Bore, Comet

This 20 Series Symmetrical Driven Pulley is made in the USA by Comet. 6" Diameter 5/8" Bore 3/16" Keyway. 

30 Series 6" Driven 5/8" Bore, Comet

This 30 Series Driven Pulley is made in the USA by Comet. Most commonly used on Manco Go Karts with 5 HP -7 HP engines. This Driven Pulley can also be used with the Comet Torq-A-Vert Kit as well.   6" Diameter with 5/8" Bore Common used with...

Comet 30 Series TAV2 Torque Converter Kit, 3/4" Bore 12T #35

Made in the USA, the Comet TAV2 Torque Converter Kit is designed to be used on go-karts and mini-bikes with engine sizes 3hp to 7hp. This is a must-have on live axle go-karts, especially those with rear tires larger than 16" tall. A centrifugal clutch...

Wear Buttons, 40 Series

Buttons that fit a current 40 series driver. Comes in pack of 3.

3/4" Bronze Bushing, 20/30 Series Comet

The Comet Bronze Bushing is a top-quality component designed for use in the 30 series 3/4" drive system.    Bronze idler bushing used on 20 and 30 series driver pulleys for a 3/4" diameter crankshaft.   Measurements: 1 1/16" - ID 1 3/16...

Torque Converter Weight Assembly, 20/30 Series Comet

Weight assembly with springs, used on Comet and aftermarket style torque converter driver unit 20 and 30 series. Comes with part #11188 garter springs.  

Garter Springs, 20/30 Series Driver

The 20/30 series Garter Spring for Driver Unit is a high-quality replacement spring.   Two springs that wrap around the shoe driver assembly with blue tips. Used on 20 and 30 series driver clutches. Comes with 2 springs. Made in the USA by comet.